Heavy duty horizontal sliding (HS) secondary glazing.
Heavy duty horizontal sliding (HS) secondary glazing, available in two and three pane configurations. Suitable for treating patio doors, very large windows, secure receptions and recording studio doors.
The sashes slide with in the frames, so do not interfere with blinds or curtains. Large ribbon windows can be accommodated by linking units with a colour-matched mullion/ transom section. The sashes are removable which facilitates cleaning and maintenance.
Thicker glass specifications will provide higher levels of noise insulation. High levels of security can be achieved when using secure lock options and polycarbonate glass.
Will reduce heat loss by up to 50% using standard glass and up to 65% with a thermally efficient glass (low emissivity). High performance brush seals will almost eliminate drafts and ensure greater comfort near the window.
Twin compression seals, concealed fixings, can be coupled to other units with colour matched aluminium alloy transom/ mullion
Extruded aluminium alloy 6063-T6
Ten year manufacturers guarantee subject to Selectaglaze terms and conditions
Series 80 heavy duty horizontal sliding (HS)
As primary window designs/ sightlines
Horizontal sliding two pane
Horizontal sliding three pane
Horizontal sliding three pane centre
Insert required dB level.
See 'Options' below and insert requirements.
ISO 16933 EXV 33
Horizontal sliding two/ three pane styles only.
Secured by Design
Anodizing, Analok bronze AA25
Anodizing, Analok silver AA10
Polyester powder-coating, HIPCA 9910 semi-gloss white
Polyester powder-coating, RAL
Insert RAL colour.
Wood grain effect
H3 Recessed finger pull, colour matched to frame
H4 Moulded handle, colour matched to frame
H23 - S80/90 locking actuator
L21 S80/90 Standard multipoint
L22 S80/90 EXV 33/ SBD multipoint
L28 U Channel track restrictor, colour matched to frame
Over the frame acoustic ventilator
Over the frame standard ventilator
|Acoustic reveal linings|
Vinyl faced acoustic foam
|Standard product features|
Extruded aluminium alloy 6063-T6.
- Maximum (h x w):
Sash height to width ratio should not normally exceed 4.5:1.
Values of <2.9 W/m²K available; consult manufacturer for details.
Series 10 Slimline Horizontal Sliding 2 Pane
Series 10 Slimline Horizontal Sliding 3 Pane
Series 10 Slimline Horizontal Sliding 3 Pane Centre
Series 10 Slimline Horizontal Sliding 4 Pane
Series 15 Mid-Range Horizontal Sliding 2 Pane
Series 15 Mid-Range Horizontal Sliding 3 Pane
Series 20 Slimline Vertical Sliding
Series 25 Mid-Range Vertical Sliding
Series 30 Slimline Lift Out
Series 30 Slimline Shuffle Out