Specialist framing system allowing individual panes to tilt inwards on safety stays to assist with cleaning. Particularly suited to treating traditional sash windows with offset meeting stiles.
Slimline, tilt-in vertical sliding (VS) secondary glazing. Specialist framing system allowing individual panes to tilt inwards on safety stays to assist with cleaning. Particularly suited to treating traditional sash windows with offset meeting stiles.
Allows close fitting to the existing windows. Suitable for listed buildings where the primary glazing cannot be changed. It is a reversible adaptation, so generally accepted by heritage agencies.
Will reduce heat loss by up to 50% using standard glass and up to 65% with a thermally efficient glass (low emissivity). The system is also fitted with a mixture of high performance brush and compression seals that will minimize drafts and ensure greater comfort near the window.
Twin compression seals, concealed fixings, can be coupled to other units with colour matched aluminium alloy transom/ mullion, adjustable spring balances
Extruded aluminium alloy 6063-T6
Ten year manufacturers guarantee subject to Selectaglaze terms and conditions. Five year on spring and spiral balances
L10/58 Secondary glazing system
L10/580 Secondary glazing system
Series 60 tilt-in vertical sliding (VS)
As primary window designs/ sightlines
Insert required dB level.
See 'Options' below and insert requirements.
Anodizing, Analok bronze AA25
Anodizing, Analok silver AA10
Polyester powder-coating, HIPCA 9910 semi-gloss white
Polyester powder-coating, RAL
Insert RAL colour.
Wood grain effect
H1 Integral finger pull, colour matched to frame
H17 Cranked D handle, colour matched to frame
L2 fitch catch (lockable), black
L2 fitch catch (lockable), brushed steel
L2 fitch catch (lockable), gold
L2 fitch catch (lockable), polished chrome
L2 fitch catch (lockable), white
Over the frame acoustic ventilator
Over the frame standard ventilator
Acoustic reveal linings
Vinyl faced acoustic foam
Standard product features
Extruded aluminium alloy 6063-T6.
- Minimum (h x w):
400 x 400 mm.
- Maximum (h x w):
Maximum sash area subject to 20 kg weight capacity limit. Sash height to width ratio should not normally exceed 1:3.
Values of <2.9 W/m²K available; consult manufacturer for details.
Series 10 Slimline Horizontal Sliding 2 Pane
Series 10 Slimline Horizontal Sliding 3 Pane
Series 10 Slimline Horizontal Sliding 3 Pane Centre
Series 10 Slimline Horizontal Sliding 4 Pane
Series 15 Mid-Range Horizontal Sliding 2 Pane
Series 15 Mid-Range Horizontal Sliding 3 Pane
Series 20 Slimline Vertical Sliding
Series 25 Mid-Range Vertical Sliding
Series 30 Lift Out
Series 40 Half Hour Fire Fixed Light