Slimline framing section in a 2 pane horizontal sliding option that provides easy access to the outer window.
Slimline horizontal sliding (HS) secondary glazing unit, available with two, three or four sliding sash options. Removable to provide easy access to the outer window, facilitating cleaning and maintenance.
Sashes have integral full height finger pulls, 23 mm wide interlock stile and twin silicone treated, grey polypropylene pile weatherseals. All fixings are concealed within the frame, which may be linked to other frames with a colour-matched mullion/ transom section.
Suitable for listed buildings where the primary glazing cannot be changed. It is a reversible adaptation, so generally accepted by heritage agencies.
Will reduce heat loss by up to 50% using standard glass and up to 65% with a thermally efficient glass (low emissivity). High performance brush seals will almost eliminate drafts and ensure greater comfort near the window.
Thermal performance:
U-values as low as 1.8 W/m²K (timber primary window and low-E glass in secondary glazing).
Approvals:
Size | As drawing Insert details. As schedule Insert details. |
Features | Twin compression seals, concealed fixings, can be coupled to other units with colour matched aluminium alloy transom/ mullion, low profile running track |
Material | Extruded aluminium alloy 6063-T6 |
WarrantyDescription | Ten year manufacturers guarantee subject to Selectaglaze terms and conditions |
Uniclass 2015 | |
CAWS | L10/58 Secondary glazing system L10/580 Secondary glazing system |
Product Reference | Series 10 Slimline Horizontal Sliding (HS) |
Style | As primary window designs/ sightlinesHorizontal sliding, two paneHorizontal sliding, three paneHorizontal sliding, three pane, centreHorizontal sliding, four pane |
Size | As drawingInsert details. As scheduleInsert details. |
Acoustic performance | Insert required dB level. |
Thermal performance | See 'Options' below and insert requirements. |
Blast performance | Not requiredISO 16933 EXV 45Horizontal sliding, two pane or three pane only. |
Frame | - |
Style | StandardLow profileTriple |
Frame finish | Anodizing, Analok bronze AA25Anodizing, Analok silver AA10Polyester powder-coating, HIPCA 9910 semi-gloss whitePolyester powder-coating, RALInsert RAL colour. Wood grain effect |
Gloss level | Not requiredHigh glossMattSemi-gloss |
Glazing | - |
Type | LaminatedLaminated, low-EToughenedToughened, low-E |
Thickness | 4 mm6 mm6.4 mm6.8 mm |
Glazing gasket | BlackWhite |
Ironmongery | - |
Handles | H1 integral finger pull, colour matched to frameH3 recessed finger pull, colour matched to frame |
Locks | Not requiredL1 shoot boltInternal, not seen. L2 fitch catch (lockable), whiteL2 fitch catch (lockable), blackL2 fitch catch (lockable), brushed steelL2 fitch catch (lockable), polished chromeL2 fitch catch (lockable), goldL4 plunge lock, polished chromeL13 sliding latch, colour matched to frame |
Trickle ventilators | Not requiredOver the frame standard ventilatorOver the frame standard ventilator |
Acoustic reveal linings | Not requiredVinyl faced acoustic foam |
Standard product features | Frame: - Material: Extruded aluminium alloy 6063-T6. |
Product Options | Size: Sash height to width ratio should not normally exceed 4:1.
Thermal performance: Values of <2.9 W/m²K available; consult manufacturer for details. |
Platform | Compatible | Version | Certified to |
---|---|---|---|
![]() | Revit 2015 | 2 | 1.3 |
![]() | IFC2X3 | 2 | 1.3 |
Series 10 Slimline Horizontal Sliding 3 Pane
Series 10 Slimline Horizontal Sliding 3 Pane Centre
Series 10 Slimline Horizontal Sliding 4 Pane
Series 15 Mid-Range Horizontal Sliding 2 Pane
Series 15 Mid-Range Horizontal Sliding 3 Pane
Series 20 Slimline Vertical Sliding
Series 25 Mid-Range Vertical Sliding
Series 30 Slimline Lift Out
Series 30 Slimline Shuffle Out
Series 40 Half Hour Fire Fixed Light