SeceuroVision CD38 Punched

Third party certifications:

QA Certificate
Certificate type

Medium security built-on roller shutter with punched holes on the aluminium slats.

Jump to:

Application

For external fitting. Primarily for use within medium security domestic, commercial, retail and office applications. Can also be used within bars, restaurants, and kiosks.

Description

Medium security built-on roller shutter with punched holes on the aluminium slats.

The shutter will lock automatically at the top when fully lowered. The bottom section of the shutter box is riveted after installation. The fixing screw-heads are rendered unusable and are concealed behind cover caps. The aluminium slats coil tightly into a range of compact boxes (137–250 mm), minimizing their visual impact.

Features and benefits:

Provides up to 45% visibility through the shutter.

Designed to integrate seamlessly into a building.

Unobtrusive, aesthetically pleasing, compact, lightweight and easy to use.

Provides secure daily use against burglary and vandalism.

Range of colours available. Bespoke colours can also be incorporated for unique project requirements.

Available with radio motors for automation with wireless control - consult manufacturer for details.

Can be combined with SeceuroShield 38 perforated or standard variants where required.

Manufactured in the UK.

CE marked.

Two-year guarantee on the shutter, five-year guarantee on the motor (for electric variants).

Applications:

For external fitting. Primarily for use within medium security domestic, commercial, retail and office applications. Can also be used within bars, restaurants, and kiosks.

General information

Uniclass 2015	Pr_30_59_84_73 Roller shuttersPrimary
CAWS	L20/610 Roller shutters/ curtains

Specification data - Roller shutters

Product Reference	SeceuroVision CD38 Punched
Opening size	540–2880 mm (width), 398-4700 mm (height). Insert requirements.
Design	-
Type	Brick-bond At additional cost. In-line
Glazing	Not required Polycarbonate glazing
Format	External (around the opening)
Guide rails	H30, 60 x 24 mm H40/S, 70 x 27 mm For higher levels of security.
Finish	-
Slats	Brown Slats generally. Cream Slats generally. Dark brown Bottom slat only. White Bottom slat/ slats generally. Bespoke Insert RAL/ BS colour.
Shutter Box	Dark brown White Bespoke Insert RAL/ BS colour.
Guide rails	Brilliant white Brown Cream Dark brown Standard only. White Bespoke Insert RAL/ BS colour.
Operation	Electric Recommended on shutters above 25 kg, optional on smaller shutters (minimum shutter width 750 mm). Geared belt winder For shutters between 15–25 kg. 1:3 ratio with removable handle for belt operated shutters. Rod crank operation For shutters up to 25 kg. Incorporates a geared rod crank handle 1500 mm long which hangs vertically. Spring loaded A counterbalance spring in the axle ensures controlled raising and lowering. Swivel belt winder For shutters up to 15 kg. The swivel winder coils the belt when it is pulled to open the shutter.
Control	Manufacturer's standard
Accessories/ Other requirements	Not required 30 x 20 mm angle On the sill. Bottom lath (reinforced angle/ sloped)

Standard product features

Components:

Slats: Single skin extruded aluminium. 40 mm high x 8.7 mm thick (6.5 kg/m² without glazing, 8 kg/m² with glazing).

Shutter box: Roll formed aluminium in two sections (top and bottom boxes). Bottom box is removable for installation and maintenance, and is chamfered at 45°. Assembled on die cast aluminium end plates. Box size depends upon clear opening height.

Motor (electric variant only): 240 V AC tubular motor, supplied as standard with a 2 m cable. Complete with integral limit switches and thermal cut-out to prevent overheating.

Product Options

Finish:

- Slats:

A finish must be selected for both the main body, and the bottom slat.

Guide rails:

Extruded aluminium with an integral box section for reinforcement and to facilitate fixing, with 5 mm pile brush seals for quiet and smooth operation.

Operation:

- Electric:

Provision of a 13 A fused spur is required for installation. A manual override should be priced and ordered separately for shutters which are to be installed on exit doorways to permit operation in the event of a power failure.

- Rod crank operation:

Secures to a clip when not in use. The gear is installed in the box, the gear ratio varies with shutter weight.

Spring loaded:

An espagnolette key lock or shoot bolts lock into the guide rails and are usually incorporated in the bottom slat. Final adjustment of the spring loading after installation is always required.

- Swivel belt winder:

The belt is 14 mm wide and grey in colour. External shutters are supplied with a guide tube to protect the belt through the building wall.

Control:

Electric: Momentary switch which must be held until the shutter reaches the desired position.

Third party certifications