SeceuroShield 7501 And SeceuroVision 7501 Traditional
Traditional-style steel roller shutter, with scrolled slat profile.
Suitable for high-security office, commercial and industrial applications. This product can only be installed internally, and the shutter box must be installed above the structural opening.
Traditional-style steel roller shutter, with scrolled slat profile. Features steel headbox, steel channel and angle guides. This strong construction is suitable for larger sizes.
Features and benefits:
- Available as solid or perforated.
- Spans widths of up to 6000 mm.
- Can be powder-coated in any RAL/ BS colour.
- Available in white, brown, black and cream as standard.
- Flexibility to mix solid and perforated slats together when only partial vision is required.
- Will reverse coil if required (will increase coil size).
- Only available in 22 g slat.
- Wind class rating: Class 3 (when used on 65 mm+ guides).
- Loss Prevention Certification Board (LPCB) LPS 1175 and Secure by Design-compliant.
Application:
Suitable for high-security office, commercial and industrial applications. This product can only be installed internally, and the shutter box must be installed above the structural opening.
| Finish | Galvanized Standard. Powder-coated RAL and BS colours available at extra cost. Insert requirements. |
| Uniclass 2015 | |
| CAWS | L20/610 Roller shutters/ curtains |
| Product Reference | SeceuroShield 7501 Traditional StyleSeceuroVision 7501 Traditional Style |
| Finish | GalvanizedStandard. Powder-coatedRAL and BS colours available at extra cost. Insert requirements. |
| Shutter box colour | BrownWhite |
| Motor | Consult manufacturer for details and insert requirements. |
| Wicket door | Not requiredRequired |
| Accessories | NoneBullet lockLock for bottom slat |
| Standard product features | Size (h x w, minimum–maximum): 600–4700 x 900–6000 mm. (2800 x 4000 mm, maximum if spring and lock.) - Slats: Nominally 75 mm high x 19 mm thick. - Bottom slat (h x d): 'T' section – 49 x 74 mm. - Shutter box:
- Guide rails (w x d): 65 x 40 mm. Construction: - Slats:
- Bottom slats: 'T'-sectioned steel bottom slat. - Shutter box: Three-sided steel casing with steel end plates. - Guide rails: 3 mm steel channels. Operation: - Electric: Electric operation is required on larger shutters due to the weight, and is optional on smaller shutters. Operation is by a tubular motor inside the axle. Control is by a momentary switch, which must be held until the shutter reaches the desired position. Electrically operated SeceuroShield 7501 and SeceuroVision 7501, which are less than 3 m wide, will require a lock in the bottom slat. Electrically operated SeceuroShield 7501 and SeceuroVision 7501, which are between 3 and 6 m wide, will require a bullet lock on each guide rail. - Spring-loaded: A counterbalance spring in the axle ensures controlled raising and lowering. A lock in the bottom slat is used to secure the shutter when closed. Weight:
Fixings: Varies depending on size; consult the literature for details. The shutter box is fixed at each end and 1000 mm centres. |