NBS Source
List your products
Application

Suitable for medium-security office – commercial and industrial applications. This product can be installed internally or externally.

Description

Continental-style steel roller shutter, combined with foam-filled slat profile. Minimal thermal bridges and the use of fine-pored polyurethane (PU) rigid foam infill ensure good thermal insulation, whilst curtain and sealing technology used around the entire shutter reduces noise from both inside and outside.

Features and benefits:

  • Heat transmission performance for the 77 mm single-slat profile 4.01 W/(m²·K).
  • Can be powder-coated in any colour.
  • Choice of four guide arrangement options.
  • Standard guide angle is 75 x 50 mm (other sizes are available on request).
  • Safety edge included.

Application:

Suitable for medium-security office – commercial and industrial applications. This product can be installed internally or externally.

General information
Finish

Galvanized

Standard.

Mill

Guide channels and bottom slat.

Powder coated

Insert requirements.

Uniclass 2015
Roller shutters (Pr_30_59_84_73)Primary
Specification data - Roller shutters
Product Reference

SeceuroDoor 77t

Finish

Galvanized

Standard.

Mill

Guide channels and bottom slat.

Powder coated

Insert requirements.

Motor

Not required

Tube motor

Accessories

None

Bullet lock

Standard product features

Size (h x w, minimum–maximum):

600–3400 x 900–6000 mm. (2800 x 4000; maximum if spring and lock).

- Laths:

Nominally 77 mm high x 15 mm thick.

- Bottom slat (h x d):

77 x 17 mm.

- Guide channels (w x d):

95 x 34 mm.

Construction:

- Laths:

Foam-filled, insulated lath.

- Bottom slats:

Extruded bottom slat.

- Hood and fascia:

Two or three-piece steel casing with steel end plates.

- Guide channels:

3 mm aluminium channels.

Operation:

- Electric:

Electric operation is required on larger shutters due to the weight, and is optional on smaller shutters. Operation is by a tubular motor inside the axle. Control is by a momentary switch, which must be held until the shutter reaches the desired position.

Weight:

12 kg/m².

Fixings:

Varies depending on the application; consult the literature for details. The hood is fixed at each end and 1000 mm centres.

Similar products from SWS UK