NBS Source
List your products

SeceuroDoor 7502

Third party certifications:
  • QA Certificate

    Certificate type

SWS UK

Insurance-approved security shutters, tested to Loss Prevention Standard 1175-2 (LPS1175-2).

Jump to:
+44 (0)1524 772400 www.sws.co.uk
Application

Suitable for high-security industrial applications.

Description

Insurance-approved security shutters, tested to Loss Prevention Standard 1175-2 (LPS1175-2).

Features and benefits:

  • Strong, single-skin galvanized steel profile.
  • Spans widths of up to 7000 mm.
  • Endlocks: steel endlocks and windlocks.
  • Wind class rating: Class 2.
  • Can be powder-coated in any RAL or BS colour.
  • The entire SeceuroDoor range is available as a direct-drive, inboard, single-phase or three-phase.
  • Loss Prevention Standard 1175-2 (LPS1175-2), security level 2.
  • The product is internally face-fitted around the opening.
  • The head (axle/ box/ canopy) is to be concealed behind the structure of the building.
  • Bullet lock must be fitted to the internal side (accessed from the inside of the building only).

Application:

Suitable for high-security industrial applications.

General information
Finish

Galvanized

Standard.

Powder-coated

RAL and BS colours available at extra cost. Insert requirements.

Uniclass 2015
Roller shutters (Pr_30_59_84_73)Primary
Specification data - Roller shutters
Product Reference

SeceuroDoor 7502

Finish

Galvanized

Standard.

Powder-coated

RAL and BS colours available at extra cost. Insert requirements.

Motor

Industrial single-phase

Industrial three-phase

Tubular motor

Standard product features

Size (h x w, minimum–maximum):

2000–4600 x 2000–6200 mm.

- Slats (h x d):

75 mm (85 mm to top of quirk) x 19 mm.

- Bottom slat (h x d):

'T' section – 49 x 74 mm.

- Guide channels:

40 x 100 mm.

- Hood, fascia and endplate:

  • End plate: industrial: 92 x 6, 8 or 10 mm (depends on endplate size). Tubular: 3 mm thick.
  • Hood and fascia: 0.9 mm-thick sheet steel.

Construction:

- Slats:

75 mm 18 g (1.2 mm) single-skin slat.

- Bottom slats:

'T'-sectioned steel bottom slat.

- Hood and fascia:

Steel hood and fascia are optional, and are sized by the end plates used. If over 3 m these will come as two pieces, and if over 6 m they will come as three pieces.

  • Industrial: folded, commercial steel end plates are used, ranging from 350–500 mm.
  • Tubular: flat steel end plates ranging from 250–400 mm.

- Guide channels:

100 mm steel wind guides.

Axle assembly:

  • Steel barrels ranging from 4” 16 g to 6 5/8” 6 g with industrial: a drive shaft (30, 40 or 55 mm) on one side and dummy shaft (30, 40 or 55 mm) on the other.
  • Drive: inboard/ direct-drive.

Weight:

14 kg/m².

Third party certifications
  • Loss Prevention Standard 1175-2: Certificate: 390e/02 - Security level 2
Similar products from SWS UK