List your products

Compare

Favourite

SeceuroDoor 75 And SeceuroDoor Vision 75

Industrial-style steel roller shutter with scrolled slat profile.

Jump to:

+44 (0)1524 772400 www.sws.co.uk

Application

Suitable for commercial and industrial applications. This product can be installed internally or externally.

Description

Industrial-style steel roller shutter with scrolled slat profile.

Features and benefits:

Strong, single-skin galvanized steel profile.

Can be powder-coated in any RAL/ BS colour.

Available with 18, 20 or 22 g slats.

Selection of four guide arrangement options.

Wind class rating: Class 3 (when used on 65 mm+ guides).

The entire SeceuroDoor range is available as a direct-drive, inboard, single or three-phase.

Safety edge included.

- Vision option available:

Delivers up to 25% vision (when backlit)

Can be mixed with solid SeceuroShield 75 when only partial vision is required.

Application:

Suitable for commercial and industrial applications. This product can be installed internally or externally.

General information

Finish

Galvanized

Standard.

Powder coated

RAL and BS colours available at extra cost. Insert requirements.

Uniclass 2015

Pr_30_59_84_73 Roller shuttersPrimary

Specification data - Roller shutters

Product Reference	SeceuroDoor 75 SeceuroDoor Vision 75
Guide channels	65 mm wide x 32 mm deep 100 mm wide x 32 mm deep plain 65 mm x 40 mm windlock guides 100 mm x 40 mm windlock guides
Finish	Galvanized Standard. Powder coated RAL and BS colours available at extra cost. Insert requirements.
Motor	Consult manufacturer for details and insert requirements.
Wicket door	Not required Required

Standard product features

Size (h x w, minimum–maximum):
1000–7000 mm. Maximum width for powder-coating is 6500 mm. (5000 mm maximum for 22 g.)
- Laths:
Nominally 75 mm high x 19 mm thick. (20 g: 0.9mm thick, 22 g: 0.7mm thick.)
- Bottom slat (h x d):
'T' section - 49 x 74 mm.
'L' Section – 88 x 31 mm.
- Hood and fascia:
To suit end plate (350–550 mm).
Construction:
- Laths:
SeceuroDoor 75 uses a single-skin, scrolled solid steel lath.
SeceuroDoor Vision 75 uses a single-skin, scrolled, perforated steel lath.
- Bottom slats:
'L' or 'T'-sectioned steel bottom slat.
- Hood and fascia:
Two or three-piece steel casing with steel end plates.
- Guide channels:
3 mm galvanized steel channels.
Operation:
- Electric:
Electric operation is by a single or three-phase motor, either direct-drive or chain-driven. Control is by either a control panel or a momentary switch, which must be held until the shutter reaches the desired position.
Weight:
SeceuroDoor 75: 10 or 12 kg/m².
SeceuroDoorVision 75: 8 kg/m².
Fixings:
Varies depending on size; consult the literature for details. The hood is fixed at each end and 1000 mm centres.