SeceuroDoor 100 And SeceuroDoor Vision 100

Name: SeceuroDoor 100 And SeceuroDoor Vision 100
Brand: tEFunJkmWegC59SfWk3dSb
SKU: 9n12TnpGRBDceZp8Z72JKK

SWS UK

Industrial-style steel roller shutter, with insulated infill slat profile.

Jump to:

+44 (0)1524 772400 www.sws.co.uk

Application

Suitable for commercial and industrial applications. This product can be installed internally or externally.

Description

Industrial-style steel roller shutter, with insulated infill slat profile. Minimal thermal bridges and the use of chlorofluorocarbon (CFC)-free insulation infill ensure good thermal insulation, whilst curtain and sealing technology used around the entire shutter reduces noise from both inside and outside.

Features and benefits:

Choice of four guide arrangement options.

Can be powder-coated in any colour.

Standard guide angle is 100 x 50 mm.

Vision panel with a minimum of 200 mm space in-between.

Wind class rating: Class 5.

Safety edge included.

Application:

Suitable for commercial and industrial applications. This product can be installed internally or externally.

General information

Finish

Galvanized

Standard.

Mill

Bottom slat.

Plastisol coated

Optional; this finish applies to the external face of the curtain only.

Powder-coated

RAL and BS colours available at extra cost. Insert requirements.

Uniclass 2015

Pr_30_59_84_73 Roller shuttersPrimary

Specification data - Roller shutters

Product Reference	SeceuroDoor 100 SeceuroDoor Vision 100 200 x 55 mm clear perspex vision panel.
Finish	Galvanized Standard. Mill Bottom slat. Plastisol coated Optional; this finish applies to the external face of the curtain only. Powder-coated RAL and BS colours available at extra cost. Insert requirements.
Motor	Not required Tube motor
Accessories	None Bullet lock Not on wind guides.

Standard product features

Size (h x w, minimum–maximum):
1000–7000 mm. (Maximum width for powder-coating is 6500 mm).
- Laths:
Nominally 100 mm high x 24 mm thick.
- Bottom slat (h x d):
45 x 25 mm.
- Hood and fascia:
To suit end plate (350–550 mm)
- Guide channels (w x d):
80 x 68 mm.
Construction:
- Laths:
SeceuroDoor 100 uses an insulated infill steel lath.
SeceuroDoor Vision 100 uses an insulated infill punched and glazed steel lath.
- Bottom slats:
Extruded bottom slat.
- Hood and fascia:
Two or three-piece steel casing with steel endplates.
- Guide channels:
3 mm galvanized steel channels.
Operation:
- Electric:
Electric operation is by a single or three-phase motor, either direct-drive or chain-driven. Control is by either a control panel or a momentary switch, which must be held until the shutter reaches the desired position.
Weight:
18 kg/m².
Fixings:
Varies depending on the application; consult the literature for details. The hood is fixed at each end and 1000 mm centres.

Product Options

Finish:
Please note that this product will be powder-coated after it has been assembled (this finish applies to the external face of the curtain only).

SeceuroDoor 100 And SeceuroDoor Vision 100

Galvanized

Mill

Plastisol coated

Powder-coated

SeceuroDoor 100

SeceuroDoor Vision 100

Galvanized

Mill

Plastisol coated

Powder-coated

Not required

Tube motor

None

Bullet lock

Finish:Please note that this product will be powder-coated after it has been assembled (this finish applies to the external face of the curtain only).

Finish:
Please note that this product will be powder-coated after it has been assembled (this finish applies to the external face of the curtain only).