NBS Source
I'm a manufacturer

SD90

Verified by manufacturer 7 months ago

Dagard SAS

Modular partition SD with removable cladding.

Jump to:
+33 (0)555 824000 Website

Application

Suitable for hospitals and operating rooms.

Suitable for high maintenance application as smart factory and pharmaceutic

Description

Modular partition manufactured from a metallic stud frame and two individually removable skinned panels, allowing the easy incorporation of any services routing, wiring or components. Partition overall thickness: 90 mm (standard), can be increased to suit project requirements. Airtightness is achieved by a bead of mastic (cleanroom grade silicone caulk, MS Polymer, chemical cold weld) applied on site in the calibrated gaps for all skins.


Components:

The galvanized steel structural frame consists of:

  • Metallic rails (top and bottom).
  • Proprietary vertical notched metallic studs adjustable in height, placed every 1100 or 1200 mm (optional sub-module).
  • Noggins, cross-members and specific accessories available for incorporation of doors, glazing or specific equipment.

Removable cladding:

  • Metallic single or double sided panels.
  • Finished cladding manufactured from coated steel sheets (0.8 mm), backed with plasterboard/ gypsum wall board (GWB) or aluminium honeycomb core; total thickness 18 mm. Vertically clipped on the studs, with a pre-set gap of 3 mm provided for silicone caulk (gap 0.5 mm for cold welded seal).

Doors:

Hinged or sliding doors, with one or two leaves available with:

  • A wide range of sizes.
  • Aluminium or lacquered steel door frame (heat-cured epoxy-polyester powder paint, choice of colour).
  • Stainless steel variant set flush on one side or the other, or centred in the partition thickness.
  • Leaves of thickness 60 mm with metallic or high pressure laminate (HPL) facings, choice of colour.
  • Optionally available glazed or flush vision panel, selection of hardware, interlocking management, motorized system and kick plate protection.

Glazed modules:

  • Airtight double glass window system with toughened laminated safety glass, double flush.
  • Dimensions on request according to the partition layout.
  • Optional integrated (flush) manual or electrical blinds available.

Single size lining partition or two lift panels are optionally available.

General information

Color

White

Guidance for specification option:

Galvanized steel cladding.

Manufacturer guidance

Doors are available in a choice of colours.

Material

Metal

Guidance for specification option:

Galvanized steel framing. Removable cladding is available in galvanized steel and stainless steel.

Plasterboard

Shape

Rectangle

Length

3000 mm

Width

1100 mm

Uniclass

Ss_25_12_65_65 Panel partition systemsPrimary

CAWS

K30/10 Relocatable partition system

K30/130 Relocatable partition system

K30/135 Relocatable partition/ ceiling system

Specification data - Panel partition systems

Panel partitioning

Partition panels.

Joint finish

Clean room grade silicone caulk, MS Polymer, chemical cold weld.

Guidance for specification option:

Applied on site in the calibrated gaps for all skins.

System accessories

Not required.

Door hardware.

Door interlocking management.

Door kick plate protection.

Door motorisation system.

Module width

1100 mm.

Height

Guidance for specification option:

3000 mm (maximum). Stackable if required. Consult manufacturer and insert requirements.

Cladding

Double sided.

Single sided.

Material/ Finish

Galvanized steel 8/10th plus PET 55 µm, iceberg white colour (similar to RAL 9010).

Stainless steel sheet 8/10th.

Galvanized steel 8/10th plus PVC film 120 µm.

Stainless steel sheet 8/10th plus PVC and PET film 130 µm.

Manufacturer guidance

The finished cladding is made of steel sheets (0.8 mm) backed with plasterboard /GWB or aluminium honeycomb core. Total thickness 18 mm.

Core material

Plasterboard.

Aluminium honeycomb.

Door

Hinged.

Sliding.

Door leafs

One.

Two.

Material

Guidance for specification option:

Consult manufacturer and insert requirements.

Colour/ Finish

Guidance for specification option:

Consult manufacturer and insert requirements.

Vision panel

Not required.

Flush.

Glazed.

Size

Guidance for specification option:

Consult manufacturer and insert requirements.

Accessories/ Other requirements

None.

Cross-members.

Noggins.

Single size lining partition.

Guidance for specification option:

Consult manufacturer and insert requirements.

Sub-module.

Guidance for specification option:

Consult manufacturer and insert requirements.

Show more

Manufacturer guidance

Noggins, cross-members, and specific accessories available for incorporation of doors, glazing or specific equipment.

Glazed panel

Not required.

Double glass window system with toughened laminated safety glass, double flush.

Double glass window system with toughened laminated safety glass, double flush, with integrated electrical blinds.

Double glass window system with toughened laminated safety glass, double flush, with integrated (flush) manual or electrical blinds.

Manufacturer guidance

Glazed modules.

Dimensions on request according to the partitions layout. Consult manufacturer.

Sustainability data

Country of product manufacture

France

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

-

Manufacturer guidance

53% for aluminium material, 18% for steel.

Similar products from Dagard SAS

SM60

SM60

ST60

ST60