Screedmaster Speed 30

Application

  • Can be laid over most common substrates including: Cementitious screeds, concrete floors, calcium sulfate screeds and other strong, rigid subfloors.
  • The product should only be used on subfloors protected from moisture from the ground and residual construction moisture. Do not use prior to applying surface damp-proofing membranes (DPM’s).
  • It is not recommended for use over old adhesive residues. Consult the manufacturer for the appropriate smoothing compound.

Description

A two-part, high strength, polymer modified, cementitious underlayment for smoothing uneven floors prior to laying decorative floor coverings.

It is suitable for use with warm water underfloor heating installations, provided a maximum surface temperature of 27°C is not exceeded. The heating must be switched off at least 48 hours before and after application. For radiant underfloor heating systems, consult the manufacturer for details.

Features and benefits:

  • Manufactured using Turbodry technology.
  • Loose lay in 45 minutes.
  • Protein-free, so may be used in biologically sensitive installations. It should always be covered with a floor covering.
  • Bonded floor coverings from 3 hours

Applications:

  • Can be laid over most common substrates including: Cementitious screeds, concrete floors, calcium sulfate screeds and other strong, rigid subfloors.
  • The product should only be used on subfloors protected from moisture from the ground and residual construction moisture. Do not use prior to applying surface damp-proofing membranes (DPM’s).
  • It is not recommended for use over old adhesive residues. Consult the manufacturer for the appropriate smoothing compound.

Priming:

In all cases the subfloor must be primed prior to application of the smoothing compound as below.

When priming the following substrates, it is recommended to use the following primer:

  • Absorbent substrates: Bostik Screedmaster Universal Primer (diluted 1:2 with water).
  • Dense/ non-absorbent substrates including epoxy membranes: Neat Bostik Screedmaster Universal.
  • Calcium sulfate screeds: Bostik Screedmaster Epoxy Primer (diluted 1:1 with water).
  • Applications in excess of 10 mm of smoothing compound: Bostik Screedmaster Epoxy Primer.

General information

Uniclass 2015

Pr_35_31_06_80 Smoothing and levelling underlay compoundsPrimary

CAWS

C42/320 Levelling/ smoothing coats

M10/12 Proprietary polymer modified levelling screeds

M10/160 Proprietary self smoothing levelling screeds

M10/7 Proprietary quick drying levelling screeds

M13/10 Proprietary trowelled levelling screeds

M13/110 Proprietary trowelled levelling screeds

M40/460 Smoothing underlayment

M50/460 Smoothing/ levelling underlayment compound

Specification data - Smoothing and levelling underlay compounds

Product Reference

Screedmaster Speed 30

Standard product features

Technical characteristics:

  • Composition: Cement/ polymer.
  • Gauging liquid: Screedmaster Speed 30 liquid.
  • Application temperature: 5–25°C.
  • Coverage: 4–5 m² (per bag) at 3 mm thickness, 2.5 m² (per bag) at 5 mm thickness (approximately).
  • Application thickness: 2–20 mm.
  • Reaction to Fire (to EN 13813): F.
  • Compressive strength (to EN 13813): Typically >30 N/mm² after 28 days.
  • Flexural strength (to EN 13813): Typically >7 N/mm² after 28 days.

Drying times (<5 mm thickness at 20°C):

  • Foot traffic: 30 minutes.
  • Loose lay floor coverings: 45 minutes.
  • Floor coverings: 3 hours.

Similar products from Bostik Ltd

Bostik Screedmaster Flex

Bostik Screedmaster Flex

Bostik Screedmaster Flow

Bostik Screedmaster Flow

Bostik Screedmaster Original

Bostik Screedmaster Original

Bostik Screedmaster Smooth

Bostik Screedmaster Smooth

Bostik Screedmaster Speed 30

Bostik Screedmaster Speed 30

Bostik Screedmaster Trade

Bostik Screedmaster Trade

Bostik Screedmaster Ultimate

Bostik Screedmaster Ultimate

Screedmaster Flex

Screedmaster Flex

Screedmaster Flow

Screedmaster Flow