NBS Source
List your products
Description

Features:

  • A Schlüter-KERDI collar is attached to the large adhesive flange as a waterproofing connection. This allows for a simple and safe connection to waterproofing assemblies.
  • The spout is available in 250 and 400 mm lengths and must be selected in accordance with the width of the parapet wall and/or local conditions.
  • The drainage pipe has an inner width of 41 mm. The spouts to be used must be dimensioned accordingly.

Installation is preferred by Schlüter-Systems trained installers.

General information
Features

A Schlüter-KERDI collar is attached to the large adhesive flange as a waterproofing connection. This allows for a simple and safe connection to waterproofing assemblies

The spout is available in 250 and 400 mm lengths and must be selected in accordance with the width of the parapet wall and/or local conditions

The drainage pipe has an inner width of 41 mm. The spouts to be used must be dimensioned accordingly

Installation is preferred by Schlüter-Systems trained installers

Finish

Stainless Steel

Material

Stainless steel, material no. 1.4301 (V2A)

Uniclass 2015
Stainless steel rainwater pipes and fittings (Pr_65_52_03_80)Primary
Specification data - Stainless steel rainwater pipes and fittings
Product Reference

Schlüter®-KERDI-DRAIN-SP

Length

250 mm

400 mm

Standard product features

If a continuous parapet prevents water from draining over the edge, two independently functioning drainage systems should be installed e.g. a floor drain and a spout, or two spouts. The second spout serves as additional drainage to minimise flooding.

Material:

Stainless steel, material no. 1.4301 (V2A).

Finish:

Stainless Steel.