Schlüter®-BEKOTEC-EN/PF

Material:

• Schlüter-BEKOTEC-EN 1520PF: Polystyrene EPS 040 DEO (PS 30). It is particularly suitable for conventional mortar screeds with a minimum strength class of CT-C25-F4 (ZE 20).

• Schlüter-BEKOTEC-EN 2520P: Polystyrene EPS 040 DEO (PS 25), with a foil covering to the upper surface. It is particularly suitable for flowing screeds.

Dimensions:

• Size: 755 x 1060 mm.

• Height (overall): 44 mm.

• Stud height: 24 mm.

• Stud centres: 75 mm.

Accessories:

• Schlüter-BEKOTEC-BRS 808KF: Screed edging strip with an adhesive leg of polyethylene foam and an adhesive strip on the back for attachment to walls. Placing the Schlüter-BEKOTEC studded panel onto the polyethylene/ adhesive leg creates a connection that prevents flowing screeds from running beneath the board. Roll size 25 m length x 80 mm width x 8 mm thickness.

• Schlüter-BEKOTEC-BRS 810: Screed edging strip made of closed cell polyethylene foam with an integrated foil leg. The edge strip is positioned at floor/wall transitions or fixed building elements, with the foil leg placed below the Schlüter-BEKOTEC panel on the substrate or above the separating layer. Roll size 50 m length x 100 mm width x 8 mm thickness.

• Schlüter-BEKOTEC-BRSK 810: As Schlüter-BEKOTEC-BRS 810 but with adhesive strip on the back for attachment to walls.

• Schlüter-BEKOTEC-ENR 1520P: Edge board of EPS 040 DEO material. It is used at edges and recessed areas to BEKOTEC-EN panels to simplify cutting and minimize waste. It features a mortise and tenon edge design for interconnection. Size 305 x 455 x 20 mm.

• Schlüter-DILEX-DFP: Polyethylene foam movement joint profile for installation at door areas to prevent sound bridges. Size 60, 80 or 100 mm x 10 mm.