Schlüter®-SHOWERPROFILE

Features:

• The tapered profile features a visible surface of brushed stainless steel and a fleece fabric on the reverse for bonding with the tile adhesive. It is designed to be inserted into the U shaped groove of the matching hard PVC support profile. The profile can be used for lateral transitions to the wall or the adjoining floor.

• Schlüter-SHOWERPROFILE-S and -R are made of stainless steel V4A and have a fleece fabric laminated on the reverse for bonding with the tile adhesive.

• The support profile of Schlüter-SHOWERPROFILE-S is made of rigid recycled PVC. The visible surface of the profile is covered with a protective foil.

• The PVC support profile is available in 6 different Thicknesses from 3 mm to 22 mm to match the thickness of the tiles installed in the floor of the shower.

• The tapered profile is available in longer sections of 1200 and 2000 mm, with a height of 6 mm or 10 mm at the narrow end. It features a slope of 2% (i.e. the height changes by 2 mm across every 100 mm of length).

• Schlüter-SHOWERPROFILE-R is a two part wall transition profile made of brushed stainless steel for covering the exposed wall area where the floor slopes down to a perimeter linear drain. A fleece fabric is laminated on the reverse of the profile for bonding with the tile adhesive.

• Schlüter-SHOWERPROFILE-R is a two part wall transition profile made of brushed stainless steel for covering the exposed wall area where the floor slopes down to a perimeter linear drain. A fleece fabric is laminated on the reverse of the profile for bonding with the tile adhesive.

• Schlüter-SHOWERPROFILE-S and -R require no special maintenance or care.

Installation is preferred by Schlüter-Systems trained installers.