Schlüter®-KERDI-BOARD

Schlüter®-KERDI-BOARD

Schlüter-Systems Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Schlüter®-KERDI-BOARD is a multifunctional tile substrate for wall areas, which can be used for creating bonded waterproofing assemblies with tile coverings.

Jump to:
+44 (0)1530 813396 www.schluterspecifier.co.uk
Description

Features:

  • Schlüter-KERDI-BOARD is made from extruded XPS hard foam, with a cement free reinforcement layer laminated onto both sides, together with an anchoring fleece webbing. The surface of the board has gridlines consisting of 10 x 10 mm squares printed on one side.
  • It is waterproof and can withstand all chemical stresses that typically occur in conjunction with ceramic tile coverings.
  • It is completely level and remains free of distortions and decay. It will not rot and is highly stable, even with one sided exposure to temperature fluctuations and moisture.
  • An extruded hard foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in the tile adhesive.
  • It covers a broad range of application areas for creating level, waterproof substrates for the installation of ceramic and natural stone tiles.
  • Suitable for creating tile substrates on green masonry, existing substrates of all kinds and stud frames made of wood or metal; creating straight or curved separating walls; concealing wall mounted installations and piping (pipe boxes); creating straight or curved bathtub and shower surrounds; as well as creating work surfaces, vanities, storage shelves or any other bathroom structures.
  • The material is equally suitable for creating level substrates in floor renovation projects e.g. residential bathroom installations designed for foot traffic.
  • Tiles can be installed directly over Schlüter-KERDI-BOARD using the thin-bed method.

CE waterproofing declaration of performance available upon request.

Installation is preferred by Schlüter-Systems trained installers.

General information

Material

Extruded polystyrene (XPS) foam

WarrantyDescription

Available on request

Uniclass 2015

Pr_25_71_63_29 Extruded polystyrene (XPS) boardsPrimary

CAWS

K10/185 Wall lining system (adhesive)

Specification data - Extruded polystyrene (XPS) boards

Product Reference

Schlüter®-KERDI-BOARD

Thickness

5 mm

9 mm

12.5 mm

19 mm

28 mm

38 mm

50 mm

Panel dimensions

625 x 1250 mm

625 x 2600 mm

Uniclass 2015 Title

Extruded polystyrene (XPS) boards

Product Options

Additional Panel Options:

  • Schlüter-KERDI-BOARD-SN is a prefabricated shower niche made of Schlüter- KERDI-BOARD that can be installed in both Schlüter-KERDI and Schlüter-KERDI-BOARD wall assemblies.
  • Schlüter-KERDI-BOARD-V panel is designed for creating rounded and curved structuresand surfaces.
  • Schlüter-KERDI-BOARD-E is an angled component for creating corner formations and pipe/service boxes.
  • Schlüter-KERDI-BOARD-U is a U shaped component for creating pipe/service boxes.

Mandatory Waterproofing Accessories:

  • Schlüter-KERDI-COLL sealant adhesive.
  • Schlüter-KERDI-KEBA sealing band.

Hardware Accessories:

  • Schlüter-KERDI-BOARD-ZSD are galvanized steel or stainless steel anchors for the additional mechanical fixing of Schlüter-KERDI-BOARD to the base substrate.
  • Schlüter-KERDI-BOARD-ZT are galvanized steel or stainless steel washers for the attachment of Schlüter-KERDI-BOARD to stud frame structures.
  • Schlüter-KERDI-BOARD-ZS are quick installation screws for the attachment of Schlüter®-KERDI-BOARD to stud frame structures.
  • Schlüter-KERDI-BOARD-ZW is a 30 x 30 mm stainless steel angle profile with two trapezoid perforated anchoring legs. It is used for fixing and stabilising structures made of Schlüter-KERDI-BOARD panels. It is either attached with screws or thin-bed adhesive.
  • Schlüter-KERDI-BOARD-ZC is a U shaped profile of brushed stainless steel with trapezoid perforations in one anchoring leg. It is particularly suited for finishing the exposed edge of work surfaces, vanities and similar surfaces.
  • Schlüter-KERDI-BOARD-ZA is a U shaped profile of brushed stainless steel with trapezoid perforations in both anchoring legs. It is particularly suited for visible edges of partition walls and shelves.
  • Schlüter-KERDI-BOARD-ZB is a U shaped profile of stainless steel with trapezoid perforations in three anchoring legs. It is used for fixing and stabilising structures made of Schlüter-KERDI-BOARD panels.
  • Schlüter-KERDI-BOARD-ZDK is a double sided adhesive tape for the attachment of Schlüter-KERDI-BOARD in joint areas.
  • Schlüter-KERDI-BOARD-ZFP is a flat plastic profile that is adhered behind the U shaped profile to ensure strong reinforcement for attaching fittings; e.g. door hardware.

Digital objects
Platform Compatible Version Certified to
IFC
-

1

1.3
Revit

Revit 2017

1

2.0
Download now from NBS National BIM Library
Third party certifications
  • Certification