NBS Source
Sarnafil® T Walkway Tile


Sarnafil® T Walkway Pad is installed on site by hot air welding the two 75 mm wide welding tabs directly onto the Sarnafil® T membrane with a continuous hot air weld along the 75 mm wide tabs (tack welds are not recommended). By lapping the 75 mm wide in the same direction a Sarnamatic can be used. As the Sarnafil® T Walkway Pad slightly expand when heated up, it is recommended to weld the T Walkway Pad in expanded condition onto the membrane. Leave a 3 mm gap when butting the Sarnafil® T Walkway Pad together.


Sarnafil® T Walkway Pad is made of high quality polyolefin from new Sarnafil® T factory waste roofing membrane by injection moulding procedure.

Manufactured from high quality polyolefin (FPO) using new Sarnafil® T factory waste roofing membrane.

Features and benefits:

  • High resistance to weathering, including ultraviolet irradiation.
  • Ease of application.
  • Excellent weldability (using hot air welding).
  • Rainwater drainage from beneath the Sarnafil® T Walkway Tile is provided by a network of moulded channels.
  • Recyclable.
  • Complies with EN 13501–1 (reaction to fire) and BS 7976-2 Low (dry and wet).

General information


Chevron embossed




Flexible polyolefin (FPO)




750 x 600 mm

Uniclass 2015

Pr_25_57_51_51 Membrane walkwaysPrimary


J42/10 Warm deck roof covering

J42/485 Membrane walkway

Specification data - Membrane walkways Enhanced data


Flexible polyolefin (FPO).


Chevron embossed.

Width (minimum)

750 mm.

Thickness (minimum)

7.3 mm.


Dark grey.

Performance characteristics

Reaction to fire: Class E (EN 13501-1).

Product Reference

Sarnafil® T Walkway Tile

Similar products from Sika Sarnafil

Sarnafil® PVC Walkway Tile

Sarnafil® PVC Walkway Tile