ROOFTRAK® IFP-250 - Roof Integrated Fixing System
Verified by manufacturer 3 months ago
ROOFTRAK® IFP-250 integrated fixing point system for cold and warm roof constructions and fully supported membranes.
Application
Typical uses include:
- Architectural cladding rail supports.
- Solar panels.
- Roof plant supports.
- Timber decking.
- Roof area zoning.
- Roof services supports.
- Roof walkways.
Suitable for use with the following roof covering types:
- Built-up roofing systems.
- Ethylene propylene diene monomer (EPDM) roofing membrane.
- Glass reinforced plastic (GRP) roof coverings.
- Liquid applied roof coatings.
- Polyvinyl chloride (PVC) roofing membrane.
- Styrene butadiene styrene (SBS) and atactic polypropylene (APP) modified bitumen membranes.
- Thermoplastic polyolefin (TPO) roofing membrane.
Description
ROOFTRAK® IFP-250 Integrated fixing point system for cold and warm roof constructions, provides a structural connection whilst maintaining 100% integrity of the waterproofing layer.
Features and benefits:
- Designed for flat, pitched and vertical roof constructions where the roofing membrane or weathering layer is directly over the structural roof deck.
- Comprised of a 250 x 250 mm fixing plate and a single central threaded M10 anchor point, meaning that the fixing point can be used in any orientation, helping to simplify and streamline installation processes.
- To weather the fixing plate, the IFP 250 is factory fitted with an appropriate flange material to enable it to be weathered or sealed to the main roof area.
- Can be fixed into 18 mm-thick plywood as in structural insulated panels (SIPs), or concrete roof decks.
General information
Color | Silver |
Finish | Metallic |
Material | Stainless steel |
Warranty description | Ten year |
Uniclass | |
CAWS | E60/80 Lateral restraint straps C41/665 Lateral restraint straps H40/770 Fixing H51/580 Fixing H51/580 Fixing E42/330 Anchor bolts |
Specification data - Roof anchors for solar modules
Material | 304 grade stainless steel. |
Anchor type | Integrated fixing point (IFP), suitable for use on cold and warm roof constructions. |
Recycled content | 50%. |
Main roof weathering material | APP modified bitumen membrane. Built up roofing systems. EPDM roofing membrane. GRP roof coverings. Liquid applied roof coatings. Manufacturer guidanceSelect material for weathering flange from the list below, or consult manufacturer and insert appropriate details. |
Accessories | None. Direct fixing suitable for roof structure. Guidance for specification option:
10 mm shim, IFP-SH. Guidance for specification option: Packing shim designed to fit over the anchor point where multiple anchor points need to be level. Can be used in multiples to achieve greater packing dimensions. Note that a longer bolt will be required to secure them to the anchor points: care should be taken in selecting the bolt length as the anchor points are blind threaded holes.
M10 bolt set, IFP-BS. Guidance for specification option: Standard bolt set for IFP products, comprising a pair of M10 hex bolts and washers. Suitable for bolting materials 0.5–10 mm thick (for >10 mm thickness, a longer bolt will be required).
Movement bracket (straight), IFP-MB1. Guidance for specification option: Connecting brackets designed for use with the IFP products. Fixing holes that allow it move to accommodate thermal expansion of the frame or support members fixed to it. For further details, including loading values, consult manufacturer.
|
Flange size | APP/ SBS modified bitumen membranes. Guidance for specification option: 500 x 500 mm. EDPM/ PIB/ PVC/ TPO roofing membranes. Guidance for specification option: 400 x 400 mm. GRP roof coverings. Guidance for specification option: 200 x 200 mm. |
Fixing plate | 250 x 250 x 2 mm. Guidance for specification option: Distance between fixing threads: 52 mm. Manufacturer guidanceMild steel fixing plate, polyester powder coat (PPC) finish. |
Height | 25 mm. |
Load | Manufacturer's standard. Manufacturer guidanceIt is assumed that the IFP is fixed directly through the roofing membrane into the substrate below with 8 no. fixings and that the supporting structure has the capacity to support the design loadings likely to be encountered. - Compressive load: Maximum compressive load to be applied: 5.0 kN. - Shear load: Maximum shear load to be applied: 2.5 kN. - Tensile load: Note: Values are based on the Fixfast SF-RS-6.1 fastener as per European Technical Approval 15/0406 and allow a safety factor of three on the combined mean axial pullout value of eight fixings. For concrete substrates note that these are typical figures but should be verified by onsite pullout tests.
|
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Recyclability | Recyclable at end of life |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 50 % |
Literature
ROOFTRAK IFP-250 Brochure
ROOFTRAK IFP-250 Datasheet
Case studies
ROOFTRAK - ALDI
ROOFTRAK - Costa Coffee
ROOFTRAK - IKEA Distribution Centre
ROOFTRAK™ - Timber clad private residence
ROOFTRAK™ - Grantley Hall
ROOFTRAK™ - for Solar PV
ROOFTRAK™ - Blackdown Hills, Devon
Similar products from Nicholson STS Ltd
ROOFTRAK® IFP-AS - Roof Integrated Fixing System
ROOFTRAK® IFP-GR - Roof Integrated Fixing System
ROOFTRAK® IFP-HM - Roof Integrated Fixing System
ROOFTRAK® IFP-MR - Roof Integrated Fixing System
ROOFTRAK® IFP-PR - Roof Integrated Fixing System