NBS Source
List your products
Application

Typical uses include:

  • Architectural cladding rail supports.
  • Solar panels.
  • Roof plant supports.
  • Timber decking.
  • Roof area zoning.
  • Roof services supports.
  • Roof walkways.

Suitable for use with the following roof covering types:

  • Built-up roofing systems.
  • Ethylene propylene diene monomer (EPDM) roofing membrane.
  • Glass reinforced plastic (GRP) roof coverings.
  • Liquid applied roof coatings.
  • Polyisobutylene (PIB) roofing membrane.
  • Polyvinyl chloride (PVC) roofing membrane.
  • Styrene butadiene styrene (SBS) and atactic polypropylene (APP) modified bitumen membranes.
  • Thermoplastic polyethylene (TPE) roofing membrane.
  • Thermoplastic polyolefin (TPO) roofing membrane.

Description

Rooftrak IFP-200 Integrated fixing point system for cold roof constructions and fully supported membranes, provides a structural connection whilst maintaining 100% integrity of the waterproofing layer.

Features and benefits:

  • Designed for flat, pitched and vertical roof constructions where the roofing membrane or weathering layer is directly over the structural roof deck.
  • Comprised of a 200 x 200 mm fixing plate and an anchor point with two M10 x 20 blind threads.
  • To weather the fixing plate, the IFP 200 is factory fitted with an appropriate flange material to enable it to be weathered or sealed to the main roof area.
  • Can be fixed into 18 mm-thick plywood as in structural insulated panels (SIPs), or concrete roof decks.

Applications:

Typical uses include:

  • Architectural cladding rail supports.
  • Solar panels.
  • Roof plant supports.
  • Timber decking.
  • Roof area zoning.
  • Roof services supports.
  • Roof walkways.

Suitable for use with the following roof covering types:

  • Built-up roofing systems.
  • Ethylene propylene diene monomer (EPDM) roofing membrane.
  • Glass reinforced plastic (GRP) roof coverings.
  • Liquid applied roof coatings.
  • Polyisobutylene (PIB) roofing membrane.
  • Polyvinyl chloride (PVC) roofing membrane.
  • Styrene butadiene styrene (SBS) and atactic polypropylene (APP) modified bitumen membranes.
  • Thermoplastic polyethylene (TPE) roofing membrane.
  • Thermoplastic polyolefin (TPO) roofing membrane.

General information
Size

Overall height: 45 mm

Fixing plate: 200 x 200 x 3 mm. Distance between fixing threads: 52 mm

Uniclass 2015
Roof anchors for solar modules (Pr_80_77_27_72)Primary
Specification data - Roof anchors for solar modules
Product Reference

Rooftrak™ IFP-200

Main roof weathering material

See 'Options' below and insert requirements.

Accessories

None

Direct fixing suitable for roof structure

10 mm shim, IFP-SH

M10 bolt set, IFP-BS

Movement bracket (straight), IFP-MB1

Movement bracket (right-angle), IFP-MB2

Universal bracket (straight), IFP-UB1

Universal bracket (right-angle), IFP-UB2

Standard product features

Material/ Finish:

  • Anchor point: 304 stainless steel, machined finish.
  • Fixing plate: Mild steel fixing plate, polyester powder coat (PPC) finish.

Size:

  • Overall height: 45 mm.
  • Fixing plate: 200 x 200 x 3 mm. Distance between fixing threads: 52 mm.

Load ratings:

It is assumed that the IFP is fixed directly through the roofing membrane into the substrate below with 8 no. fixings and that the supporting structure has the capacity to support the design loadings likely to be encountered.

- Compressive load:

Maximum compressive load to be applied: 5.0 kN.

- Shear load:

Maximum shear load to be applied: 2.5 kN.

- Tensile load:

Note: Values are based on the Fixfast SF-RS-6.1 fastener as per European Technical Approval 15/0406 and allow a safety factor of three on the combined mean axial pullout value of eight fixings. For concrete substrates note that these are typical figures but should be verified by onsite pullout tests.

  • Fixed to 18 mm plywood substrate to EN 636: 5.0 kN.
  • Fixed to 18 mm oriented strand board (OSB/3) substrate to EN 300: 4.2 kN.
  • Fixed to 25 mm softwood boarding: 5.0 kN.
  • Fixed to softwood timber with 35 mm embedment: 5.0 kN.
  • Fixed to concrete substrate: 5.0 kN.

Product Options

Main roof weathering system:

Select material for weathering flange from the list below, or consult manufacturer and insert appropriate details.

  • APP modified bitumen membrane.
  • Built up roofing systems.
  • EPDM roofing membrane.
  • GRP roof coverings.
  • Liquid applied roof coatings.
  • PIB roofing membrane.
  • PVC roofing membrane.
  • SBS modified bitumen membrane.
  • TPE roofing membrane.
  • TPO roofing membrane.

- Flange size:

Consult manufacturer for details of materials not listed below.

  • APP/ SBS modified bitumen membranes: 500 x 500 mm.
  • EDPM/ PIB/ PVC/ TPO roofing membranes: 400 x 400 mm.
  • GRP roof coverings: 200 x 200 mm.

Accessories:

- Direct fixing suitable for roof structure:

Direct fixing from plate to structural substrate.

  • Material: Corrosion resistant steel or stainless steel.
  • Size: 30–300 mm.
  • Suitable for timber, steel deck and concrete substrates.
  • Very high uplift resistance values: Maximum: 5 kN.
  • Low profile head.
  • TX25 drive.

- 10 mm shim, IFP-SH:

Packing shim designed to fit over the anchor point where multiple anchor points need to be level. Can be used in multiples to achieve greater packing dimensions. Note that a longer bolt will be required to secure them to the anchor points: care should be taken in selecting the bolt length as the anchor points are blind threaded holes.

  • Material: High-density polyethylene (HDPE).
  • Size: Diameter: 76 mm; thickness: 10 mm.
  • Typical uses: Solar panel installations; roof walkway supports; signage supports; roof plant supports

- M10 bolt set, IFP-BS:

Standard bolt set for IFP products, comprising a pair of M10 hex bolts and washers. Suitable for bolting materials 0.5–10 mm thick (for >10 mm thickness, a longer bolt will be required).

  • Material: A2 grade stainless steel.
  • Bolt length: 20 mm.
  • Typical uses: Unistrut and other rail systems; general bracketry.

- Movement bracket (straight), IFP-MB1/ Movement bracket, IFP-MB2 (right-angle):

Connecting brackets designed for use with the IFP products. Fixing holes that allow it move to accommodate thermal expansion of the frame or support members fixed to it. For further details, including loading values, consult manufacturer.

  • Material: 304 stainless steel.
  • Size (l x w x t; overall): IFP-MB1: 160 x 75 x 3 mm; IFP-MB2: 63 x 75 x 3 mm).
  • Typical uses: For securing metal framing systems or other components where thermal movement should be provided for.

- Universal bracket (straight), IFP-UB1/ Universal bracket (right-angle), IFP-UB2:

Connecting brackets designed for use with IFP products. Fixing holes allowing it to be fixed in either axis and further adjusted to 15° either side of the chosen axis. Use in conjunction with IFP-BS bolt set. For further details, including loading values, consult manufacturer.

  • Material: 304 stainless steel.
  • Size (l x w x t; overall): IFP-UB1: 144 x 75 x 3 mm; IFP-UB2: 75 x 64 x 3 mm).
  • Typical uses: Securing metal framing systems; fixing timber joists.

Similar products from Nicholson STS