Roofinox Snaplock® Seam

Description

The Snaplock® seam system is extensively used in Europe and the United States of America, where the system has proved itself in the extremely varied climate. The system gives an aesthetically pleasing finish whilst avoiding the industrial finishes found in other seam systems.


Features and benefits:

  • Manufactured from lightweight corrosion resistant stainless steel.
  • Seams are available in 25 or 38 mm formats.
  • Roofinox stainless steel is manufactured in a factory in Germany, using 85% (approximately) recycled material and is itself 100% recyclable.
  • The Snaplock® seam system can be laid on a ventilated timber substrate, composite panel or direct on insulation, using special warm roof fixing clips.
  • Snaplock® is much simpler and requires less skill/ hand tools than the traditional standing seam. The profile contains an undercloak and an overcloak – the undercloak side is fixed with a stainless steel fixing clip with the overcloak side then snapped into place.
  • The system can be provided as a complete roof kit including all flashing, matching rainwater products and ancillaries.


Substructure:

Snaplock® can be mounted on all roof build-ups, the only pre-requisite being that it is fully supported.

Suitable substructure materials:

  • Ventilated 18 mm-thick weather and boil proof (WPB) plywood.
  • Ventilated oriented strand board OSB3.
  • Hard metal board.
  • Composite panel.
  • Rigid insulation.


Underlay:

ISO-Mat Pro® underlay is recommended by the manufacturer depending upon the application.


Clips:

  • 25 mm seam: SM-EH-Snap-25 (SM-EDH-Snap-25 for fixing to rigid insulation).
  • 38 mm seam: SM-EH-Snap-38 (SM-EDH-Snap-38 for fixing to rigid insulation).
  • Flashing clips: SM-ELH-27.

General information

Material

Stainless steel

Uniclass 2015

Pr_25_71_51_84 Stainless steel long strips and sheetsPrimary

CAWS

H75/110 Stainless steel sheet fully supported roof covering

H75/130 Stainless steel fully supported wall covering

H75/2 Stainless steel sheet fully supported roof covering

Specification data - Stainless steel long strips and sheets Enhanced data

Thickness

0.5 mm.

Product Reference

Roofinox Snaplock® Seam

Length

Alternative (bespoke) lengths are available, if they are logistically possible to transport. Consult manufacturer for details.

Insert project requirements, maximum 12 m.

Seam

25 mm.

Minimum pitch: 7°. Nominal centres: 425 mm.

38 mm.

Minimum pitch: 3°. Nominal centres: 386 mm.

Colour/ Finish

Classic.

Brush-rolled design.

Tin matte.

Matt finish, tin-plated design.

Chroma.

Mirror-rolled design. Special order, subject to minimum order quantities; consult manufacturer for details.

Dura Black.

Electro-coloured design. Special order, subject to minimum order quantities; consult manufacturer for details.

Dura Bronze.

Electro-coloured design. Special order, subject to minimum order quantities; consult manufacturer for details.

Show more

Literature

Similar products from Metal Solutions Limited