NBS Source
I'm a manufacturer

Application

  • Suitable for use as a decorative or clear dust proof seal on commercial or industrial floors.
  • For light traffic use only on concrete, screeded and granolithic floors.
  • Can be used for floor markings and walkways.
  • Suitable for foot and trolley traffic.

Description

Water based epoxy floor coating for light traffic use only on concrete, screeded and granolithic floors.


Features and benefits:

  • Bond strength: exceeds 3 N/mm² at seven days before failure of substrate concrete.
  • Colour range allows use for floor markings and walkways.
  • Good abrasion and chemical resistance to foot and trolley traffic.
  • Low taint.
  • Mean depth of wear: less than 0.03 mm, as defined in BS 8204-2.
  • Meets requirements of FeRFA classification type 8.
  • Provides smooth, gloss finish.
  • Surface spread of flame: BS 476-7, class 1.
  • Vapour permeability allows use on floors with 5% higher relative humidity than other coatings.


Application:

  • Prepare concrete in accordance with instructions.
  • Apply at least two coats of RonaFloor EWB by roller, with more on very porous concrete.
  • If slip resistance is required, scatter fine, kiln-dried aggregate into the first coat. Note that coverage of subsequent coats will be reduced.

General information

Color

Grey

Red

Yellow

Green

Blue

Finish

Gloss

Smooth

Manufacturer guidance

Varying finish possible with addition of kiln-dried aggregate in first coat for slip resistance.

Material

Epoxy

Guidance for specification option:

Water based epoxy floor coating.

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_35_31_06_37 Heavy-duty screed flooringPrimary

CAWS

M12/10 Resin flooring

M12/110 Resin flooring

Specification data - Heavy-duty screed flooring

Third party product certification

FeRFA classification type 8.

Colour

00A05 Mid grey.

00A09 Dark grey.

04C39 Brick red.

08E51 Yellow.

14C39 Racing green.

14E53 Bright green.

18E53 Bright blue.

Bond strength

>3 N/mm².

Guidance for specification option:

At seven days, before failure of substrate.

Wear layer

<0.03 mm.

Guidance for specification option:

Mean depth of wear.

Manufacturer guidance

To BS 8204-2.

Surface spread of flame

Class 1.

Manufacturer guidance

To BS 476-7.

Container capacity

5 L.

Sustainability data

Contains Red List materials

No

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom