RonaFloor EWB
Epoxy floor coating.
- Prepare concrete in accordance with instructions.
- Apply by roller, at least two coats of RonaFloor EWB, more on very porous concrete.
- If slip resistance is required, scatter fine, kiln-dried aggregate into the first coat. Note that coverage of subsequent coats will be reduced.
Water based epoxy floor coating for light traffic use only, on concrete, screeded and granolithic floors.
Features:
- Bond strength: exceeds 3 N/mm² at seven days before failure of substrate concrete.
- Colour range allows use for floor markings and walkways.
- Good abrasion and chemical resistance to foot and trolley traffic.
- Low taint.
- Mean depth of wear: less than 0.03 mm, as defined in BS 8204-2.
- Performance: Meets requirements of FeRFA classification type 8.
- Provides smooth, gloss finish.
- Surface spread of flame: BS 476-7, class 1.
- Vapour permeability allows use on floors with 5% higher relative humidity, than other coatings.
Application:
- Prepare concrete in accordance with instructions.
- Apply by roller, at least two coats of RonaFloor EWB, more on very porous concrete.
- If slip resistance is required, scatter fine, kiln-dried aggregate into the first coat. Note that coverage of subsequent coats will be reduced.
Features | Bond strength: exceeds 3 N/mm² at seven days before failure of substrate concrete Colour range allows use for floor markings and walkways Good abrasion and chemical resistance to foot and trolley traffic Low taint Mean depth of wear: less than 0.03 mm, as defined in BS 8204-2 Performance: Meets requirements of FeRFA classification type 8 Provides smooth, gloss finish Surface spread of flame: BS 476-7, class 1 Vapour permeability allows use on floors with 5% higher relative humidity, than other coatings |
Uniclass 2015 | |
CAWS | M12/10 Resin flooring M12/110 Resin flooring |
Product Reference | RonaFloor EWB |
Colour | 00A05, mid grey00A09, dark grey04C39, brick red08E51, yellow14C39, racing green14E53, bright green18E53, bright blue |