RonaBond Concrete Cover 150
Pre-packed, polymer modified cement coating.
- Prepare concrete in accordance with instructions.
- Apply in thin layers by slurry brush or roller.
- Continue to apply until the desired thickness is achieved.
- Approximately two coats per mm should be allowed on vertical surfaces.
Pre-packed, polymer modified cement coating to improve equivalent concrete cover to reinforcement. It is suitable for exterior, non-trafficked concrete surfaces, such as columns, beams and soffits where there is insufficient cover to reinforcement.
Features:
- Adhesion: Monolithic.
- Carbon dioxide diffusion coefficient: 2.21 x 10 (factor -5) cm²/s.
- Oxygen diffusion coefficient: 7.39 x 10 (factor -5) cm²/s.
- Protection to reinforcement steel: 4 mm cover of RonaBond Cover Plus 150 is equivalent to 150 mm concrete.
- Water and frost resistant. ISAT value: 0.00 ml/m²/sec.
Application:
- Prepare concrete in accordance with instructions.
- Apply in thin layers by slurry brush or roller.
- Continue to apply until the desired thickness is achieved.
- Approximately two coats per mm should be allowed on vertical surfaces.
Features | Adhesion: Monolithic Carbon dioxide diffusion coefficient: 2.21 x 10 (factor -5) cm²/s Oxygen diffusion coefficient: 7.39 x 10 (factor -5) cm²/s Protection to reinforcement steel: 4 mm cover of RonaBond Cover Plus 150 is equivalent to 150 mm concrete Water and frost resistant. ISAT value: 0.00 ml/m²/sec |
Uniclass 2015 | |
CAWS | C42/345 Protective coatings for concrete M60/18 Special coating M60/195 Special coating |
Product Reference | RonaBond Concrete Cover 150 |