Roller Shutter Alishield N1
Application

For commercial applications in areas requiring medium security and where vision is required, such as serveries and cabinets.

Description

Roller shutter made from 50 mm flat punched single skin aluminium laths, with 125 x 25 mm apertures.


Features and benefits:

  • For commercial applications in areas requiring medium security and where vision and/or air flow is required.
  • Vertical rolling operation.
  • Requires less room than normal.
  • Suitable for use in bars and restaurants, kiosks, retail units, cabinets and receptions.

General information

Color

Aluminium

Bespoke

Anodized or PPC (available in 500 RAL and BS 4800 colours).

Features

Suitable for air flow requirements

Medium security

Vertical rolling

Finish

Mill

Anodized

PPC

Polyester powder-coated.

Material

Aluminium

Shape

Rectangular

Size

≤3500 mm

3500 mm maximum width.

Uniclass 2015

Pr_30_59_84_73 Roller shuttersPrimary

CAWS

L20/60 Doors

L20/610 Roller shutters/ curtains

Specification data - Roller shutters Enhanced data

Opening sizes

Box sizes will vary depending on overall height (top of box):

  • Up to 2800 mm box size is 254 mm.
  • Up to 3800 mm box size is 305 mm.

Insert requirements: maximum width up to 3500 mm.

Format

Internal.

Arrangement

Vertical rolling.

Shutter curtain.

-

Lath material

Aluminium.

Profile

Flat punched single skin.

52 x 1.5 mm flat punched single skin aluminium lath with 125 x 25 mm vision apertures.

Finish and colour

Mill finish.

Standard factory finish.

Anodized.

Polyester powder-coated, colour.

Insert requirements; available in 500 RAL and BS colours.

Frame and guides

-

Material

Aluminium.

Finish

Mill finish.

Standard factory finish.

Anodized.

Polyester powder-coated.

Insert colour requirements below.

Colour

Not required.

Mill finish only.

As shutter curtain.

Colour.

Polyester-powder-coated only; insert requirements, available in 500 RAL and BS colours.

Frame accessories

None.

0.91 mm bright spangle galvanized pressed steel coil casing.

Available in various different designs to suit individual circumstances; consult manufacture for details.

Operation

-

Mode

Single phase electrical.

A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating.

Draw 240 V and 0.5-2.5 A, dependent upon the shutter size.

Provision of a 13 A fused spur is required for installation.

Spring loaded manual.

A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.

Control

A manual override is included to operate the shutter in the event of a power failure. This is usually only operable from only one side.

Rocker switch.

Security key switch.

Environmental information

Country of product manufacture

United Kingdom

Literature
Similar products from HAG Ltd. - The Door Specialists