RG-80-20 Flat Glass Rooflight With Integral Blinds
A flatglass rooflight with integral blinds.
A flatglass rooflight with integral blinds designed as an effective solar management solution in residential, commercial and public buildings.
Features and benefits:
- Building Regulations (E&W) Approved Document L compliant design to achieve low U-value targets.
- Thermally-broken aluminium frame improves thermal performance and prevents cold bridging, reducing the risk of condensation.
- Good thermal performance, with total system U-values as low as 1.4 W/m²K achievable.
- Quick and easy to install on-site.
- Designed to be installed on roof pitches from 1°.
- Non-fragility: Centre for Window and Cladding Technology (CWCT)TN66/67 and TN92, with Class 1 and Class 2 compliant solutions available.
- AA fire rated: AA designation (National Class) designation or Broof(t4) (European class) and Euro Class A1 non-combustible.
- Recommended pitch of 5° to help shed water.
- Minimal framework: Daylight is maximized while the visible framework is minimized.
- More daylight results in less artificial light, saving energy.
- 15 year warranty.
Designed to standard loadings of 640 N/m² (snow) and 750 N/m² (wind) and in accordance with the following Standards:
- BS 6375-1 2015+A1 2016: Weather tightness.
- BS EN 1026: Air permeability.
- BS EN 1027: Water tightness test.
- BS EN 12211: Wind resistance test.
- BS 1474: Aluminium Extrusions.
- EN 12020-1:2001: Aluminium Extrusions.
- BS EN ISO 16396-2:2017: Polyamide Thermal Break.
- BS EN 12206-1:2004: Powder Coating.
Size | As drawing Insert drawing reference. Bespoke sizes are available. Contact manufacturer for details. |
Uniclass 2015 | |
CAWS | L10/45 Rooflights L10/460 Rooflights |
Product Reference | RG-80-20 Flat Glass Rooflight With Integral Blinds |
Size | As drawingInsert drawing reference. Bespoke sizes are available. Contact manufacturer for details. |
Type | Consult manufacturer for details. |
Frame finish | Polyester powder coated, Black RAL 9005Polyester powder coated, Grey RAL 7016Polyester powder coated, White RAL 9010Polyester powder coated, RALInsert requirements. |
Glazing | - |
Outer pane | Consult manufacturer for details. |
Cavity | Consult manufacturer for details. |
Inner pane | Consult manufacturer for details. |
Additional requirements | See 'Options' and insert requirements. |
Blinds operation | Up and downSide to side |
Standard product features | Frame: Manufactured from extruded aluminium section to BS EN 12020-1. Size:
Kerb: Recommended 150 mm high, minimum 75 mm wide. Thermal performance (total product U-Value):
Blinds:
|
Product Options | Frame finish:
Consult manufacturer for details. Glazing: An extensive range of glazing options are available, please consult Roofglaze Rooflights for exact details. - Standard specification:
The IGU’s are manufactured to BS EN 1279. Consult the manufacturer for further details. - Additional requirements:
|