NBS Source
List your products

This product is no longer available


A decorative epoxy floor screed system, incorporating multi-coloured aggregates and designed to produce a hard wearing, attractive surface. It is applied at a minimum thickness of 4 mm and then sealed with clear resins to provide a matt or gloss finish, creating an impervious sealed surface.

Features and benefits:

  • Creates decorative and functional surfaces.
  • Can be used for coving.
  • Seamless floor to coving finish.
  • Hard wearing and durable.
  • Ease of application.
  • Low odour.
  • Good slip resistance properties.
  • Excellent abrasion and impact resistance.
  • Good chemical resistance.


Acts as a seamless decorative finish for buildings, including:

  • Pharmaceutical areas.
  • Commercial kitchens.
  • Animal compounds and veterinary areas.
  • Toilets and washrooms.
  • Reception areas.
  • Healthcare industry.
  • Production areas.
  • Laboratories.
  • Industrial workshops.
  • Prisons and police cells.

General information

Epoxy resin

Uniclass 2015
Screed flooring (Pr_35_31_06_77)Primary
Specification data - Screed flooring
Product Reference

Resuscreed™ Deco Quartz TS


Resuprime ST

Resuseal WB Clear

Resuprime MVT

For use if the concrete substrate moisture levels are above 75% equilibrium relative humidity (ERH) or no damp proof membrane is present.

Surface seal

Resucoat GC

Top coat

Resutop Clear

Matt seal

Not required

To achieve a gloss finish.

Resupen WB Matt Clear

Base screed -

Resuscreed QS

Standard product features


Epoxy resin.

System thickness:

4.5 mm.

Reaction to fire (to BS EN 13501-1):

Bfl - s1.

Curing time (at 20ºC):

  • Light traffic: 12–16 hours.
  • Designed traffic: 48–72 hours.
  • Full cure traffic: ≤7 days.

Technical characteristics:

  • Hardness, Shore D (to BS ISO 7619-1): 84 (after 24 hours).
  • Abrasion resistance (to BS EN 13892-4): AR 0.5.
  • Compressive strength (to BS EN 13892-2): 56 N/mm².
  • Tensile strength (to BS 6319-7): 5 N/mm².
  • Flexural strength (to BS EN 13892-2): 0.8 N/mm².
  • Bond strength (to BS EN 13892-8): >3 N/mm² (substrate failure).
  • Temperature resistance: Tolerant of temperatures up to 60°C.
  • Chemical resistance: Good.
  • UV stable: No.
  • FerFa class: Class 6.