NBS Source
List your products

This product is no longer available


Resucoat Deco Flake SF is a multi-component epoxy floor system which utilizes coloured flakes applied to a base coat to provide a 1 mm thick decorative flooring finish. Resucoat Deco Flake SF provides a solvent free low odour flooring solution with a hard wearing gloss or matt finish.

System includes:

  • Substrate.
  • Primer: Resuprime ST/ MVT.
  • Base coat: Resucoat HB.
  • Broadcoat: Coloured flakes.
  • Grout coat: Resutop Clear (optional second coat).
  • Seal coat: Resupen WB Matt Clear.

Features and benefits:

  • Produces decorative and functional surface.
  • High build.
  • Low odour.
  • Tough and durable.
  • Can be applied onto a wide range of substrates.


  • Decorative seamless floor areas.
  • Domestic areas.
  • Retail spaces.
  • Stadiums and arenas.
  • Factory units.
  • Toilets and washrooms.

General information
Specification data - Screed flooring
Product Reference

Resucoat™ Deco Flake SF

Standard product features

Technical characteristics:

  • System thickness: 1 mm.
  • Abrasion resistance to ASTM D4060-14: 134.7 mg loss/ 1000 Cycles.
  • Compressive strength to BS EN ISO 604: 9.6 MPa.
  • Tensile strength to BS EN ISO 527-2: 7.5 MPa.
  • Flexural strength to BS EN ISO 178: 3.2 N/mm².
  • Bond strength to EN 13892-8: >3 N/mm² (substrate failure).
  • Temperature resistance: Up to 45⁰C.
  • Reaction to fire to BS EN 13501-1: Bfl – s1.
  • Chemical resistance: Good.
  • Ultraviolet (UV) stable: No.
  • FerFa class: Class 3.
  • Volatile organic content (VOC): Varies depending on product, 12–186 g/L.
  • Coverage per unit: Varies depending on product, up to 50 m².
  • Cure rate: Depends on traffic conditions and temperature: 8 hours to 8 days.
  • Application temperature: 10–25°C and an equilibrium relative humidity (ERH) <90%.