Resin flooring system AquArmor™ S
Application

Suitable for producing a tough seamless, hygienic floor finish. AquArmor™ S can act as a curing membrane to increase hardness of concrete by allowing full hydration of cement and can be applied to new concrete, seven days after being poured.

Can be used in the following scenarios:

  • As a seal for concrete.
  • Suitable for low to medium traffic indoor applications.
  • Suitable for all types of masonry, asphalt and wood substrates.
  • Automotive and aviation areas.
  • Factory units.
  • Warehouses.

Description

AquArmor™ S is a water based epoxy resin floor system for application as an industrial floor coating at a thickness of around 100 micrometres. A sheen finish will be provided which can be clear or coloured and is suitable for all areas of industry where a hard wearing floor coating is required.

System includes:

  • Substrate.
  • Primer: Resuseal WB Clear (colour option also available).

Features and benefits:

  • Solvent-free.
  • Silica free.
  • Excellent adhesion.
  • Hard wearing.
  • Hygienic and easily cleaned.
  • Low odour.

Applications:

Suitable for producing a tough seamless, hygienic floor finish. AquArmor™ S can act as a curing membrane to increase hardness of concrete by allowing full hydration of cement and can be applied to new concrete, seven days after being poured.

Can be used in the following scenarios:

  • As a seal for concrete.
  • Suitable for low to medium traffic indoor applications.
  • Suitable for all types of masonry, asphalt and wood substrates.
  • Automotive and aviation areas.
  • Factory units.
  • Warehouses.

General information

Finish

Satin

Color

Clear

Stirling Grey

Flint Grey

Salsa Red

Features

Solvent free, internal or external use, buildable application

Material

Epoxy resin

Size

Approximately 40 microns per coat

Uniclass 2015

Ss_30_42_54_75 Resin flooring systemsPrimary

CAWS

M12/10 Resin flooring

M12/110 Resin flooring

Specification data - Resin flooring systems Enhanced data

Substrate

-

Testing

Moisture content to BS 8204

Preparation

Substrates must be clean, sound, dry and free of surface laitance with a minimum strength of 25 N/mm². Mechanically prepare substrate to provide a surface texture that will function as a key for the resin. Remove all dust and debris. Repair significant mechancial damage, pitting and cracks

Primer

No

System thickness

0.1 mm

Hardness

to BS EN ISO 1522: 83

Pendulum hardness 

Abrasion resistance

101.5 mg Loss/1000 cycles

to ASTM D4060-14

Tensile strength (to EN ISO 527)

26 MPa

to BS EN ISO 527-2

Bond strength

> 3N/mm²

(substrate failure) to EN 13892-8

Temperature resistance

Up to 45⁰C

Chemical resistance

Good

VOC content

10 g/L

Coverage

60 m²

Cure time

Depends on traffic conditions and temperature: 8 hours to 8 days

Application temperature

10–25°C and an equilibrium relative humidity (ERH) <90%

Product Reference

AquArmor™ S

UV stabilization

No

Environmental information

Country of material origin

United Kingdom

Digital objects
Platform Compatible Version Certified to
IFC
-

2

2.1
Revit
-

2

2.1
Download now from NBS National BIM Library
Literature
Similar products from Sherwin-Williams