Application

Designed for smoothing concrete floors and cement based screeds. Suitable for use on new and existing substrates, including:

  • Concrete.
  • Terrazzo.
  • Ceramic tiles.
  • Natural stone.
  • Steel.
  • Polyurethane.

Suitable for use under Regupur® Regushield Eco surface membrane, where residual or static moisture is present.

On highly porous and absorbent surfaces, a coat of primer prior to the application will prevent the formation of pinholes/ air bubbles within the surface, providing a smooth, even finish. Consult manufacturer for further details.

Description

Two-component self-levelling compound which consists of a grey powder containing special cements, graded silica sands and additives, which is mixed with a synthetic rubber latex.

Features and benefits:

  • Can be applied with an edged trowel or spiked roller.
  • Can smooth infilling differences in thicknesses from 1–10 mm.
  • Requires only one application.
  • Suitable for use where good resistance to loads is required, or where wheelchair traffic is common.
  • Can prepare substrates for any type of flooring installation.
  • Low odour - can be used in confined and inhabited areas.

Applications:

Designed for smoothing concrete floors and cement based screeds. Suitable for use on new and existing substrates, including:

  • Concrete.
  • Terrazzo.
  • Ceramic tiles.
  • Natural stone.
  • Steel.
  • Polyurethane.

Suitable for use under Regupur® Regushield Eco surface membrane, where residual or static moisture is present.

On highly porous and absorbent surfaces, a coat of primer prior to the application will prevent the formation of pinholes/ air bubbles within the surface, providing a smooth, even finish. Consult manufacturer for further details.

General information

Uniclass 2015

Pr_35_31_06_80 Smoothing and levelling underlay compoundsPrimary

CAWS

M40/110 Tiling to

M40/12 Mosaic to

M40/120 Mosaic to

M40/460 Smoothing underlayment

M40/5 Tiling to

Show more
Specification data - Smoothing and levelling underlay compounds

Product Reference

Regupur® Regulevel 2

Standard product features

Technical characteristics:

- Part A:

  • Colour: Cement grey.
  • Consistency: Fine powder.
  • Density: 1400 kg/m³.
  • Dry solids content: 100%.

- Part B:

  • Colour: White.
  • Consistency: Runny liquid.
  • Specific gravity: 1.05 g/cm³.
  • Dry solids content: 9%.
  • Emissions: EMICODE EC1 R Plus - Very low emission.

- Finished product:

  • Mixing ratio: 20 kg: 4 kg (Part A: Part B).
  • Density: 2000 kg/m³.
  • Coat thickness: 1–10 mm.
  • Application temperature: 5–35°C.
  • Workability (at 23°C): 20–30 minutes.
  • Setting time: 45–60 minutes.
  • Can withstand foot traffic: After 1 1/2–2 hours.
  • Time before laying floorcovering: 12 hours.
  • Coverage: 5 m² at 3 mm thickness.
  • Compressive strength: After 1 day: 7 N/mm²; after 7 days: 20 N/mm²; after 28 days: 26 N/mm².
  • Flexural strength: After 1 day: 3 N/mm²; after 7 days: 6 N/mm²; after 28 days: 8 N/mm².
  • Resistance to abrasion (after 28 days): 3 g.

Similar products from CMS Danskin Acoustics