NBS Source
List your products
Redlock Solenoid Locks

Redlock Solenoid Locks

Third party certifications:
  • BSI Kitemark

    BSI Kitemark

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

Allgood plc

A range of solenoid locks.

Jump to:
+44 (0)121 359 4415 www.allgood.co.uk
Description

Allgood solenoid locks are based on the Allgood Redlock.

The locks have secure, three-part, 19 mm stainless steel anti-friction and anti-thrust latchbolts.

The lock is reversible for inward or outward opening doors and is ‘guided’ for reduced wear.

Locks allow the external lever to be controlled by the continuously rated solenoid, with the internal lever always being free, to provide a means of escape.

Where restricted access and egress is required, both the internal and external levers can be controlled by the solenoid.

Performance:

  • Allgood secure locks comply with ANSI 115.1.
  • UL listed R27527.
  • Certifire approved CF 623.
  • Incorporated in successful fire test and assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors.

Monitoring:

  • Bolt: provides for a micro-switch to indicate whether the bolt of the lock is projected or retracted.
  • Cylinder: provides for a momentary contact micro-switch to indicate the use of the cylinder to retract the bolt or lock.
  • Anti-thrust bolt: provides for a micro-switch to indicate door open or closed status.

Power supply:

Allgood secure solenoid locks are available with either:

  • 12 V d.c. (250 mA) or 24 V d.c. (125 mA).

General information
Finish

SS - Satin stainless steel forend

Uniclass 2015
Pr_30_36_08_84 Special function door locksPrimary
CAWS

P21/26 Special function door locks

P21/530 Special function door locks

Specification data - Special function door locks
Product Reference

9943P5

Allgood solenoid redlock. Controlled both sides, fully monitored, 12 V d.c. fail secure.

9943P6

Allgood solenoid redlock. Controlled both sides, fully monitored, 24 V d.c. fail secure.

9944P5

Allgood solenoid redlock. Controlled both sides, fully monitored, 12 V d.c. fail safe.

9944P6

Allgood solenoid redlock. Controlled both sides, fully monitored, 24 V d.c. fail secure.

9945P5L

Allgood solenoid redlock. Outside Left lever controlled and Inside lever free to escape, RTE function, fully monitored, 12 V d.c. fail secure. HANDED.

9945P6L

Allgood solenoid redlock. Outside Left lever controlled and Inside lever free to escape, RTE function, fully monitored, 24 V d.c. fail secure. HANDED.

9946P5L

Allgood solenoid redlock. Outside Left lever controlled and Inside lever free to escape, RTE function, fully monitored, 12 V d.c. fail safe. HANDED.

9946P6L

Allgood solenoid redlock. Outside Left lever controlled and Inside lever free to escape, RTE function, fully monitored, 24 V d.c. fail safe. HANDED.

9945P5R

Allgood solenoid redlock. Outside Right lever controlled and Inside lever free to escape, RTE function, fully monitored, 12 V d.c. fail secure. HANDED.

9945P6R

Allgood solenoid redlock. Outside Right lever controlled and Inside lever free to escape, RTE function, fully monitored, 24 V d.c. fail secure. HANDED.

9946P5R

Allgood solenoid redlock. Outside Right lever controlled and Inside lever free to escape, RTE function, fully monitored, 12 V d.c. fail safe. HANDED.

9946P6R

Allgood solenoid redlock. Outside Right lever controlled and Inside lever free to escape, RTE function, fully monitored, 24 V d.c. fail safe. HANDED.

Standard product features

Finish:

SS - Satin stainless steel forend.

Product Options

Product reference:

- 9943P5:

  • Allgood Secure 99 Series vertical Euro profile solenoid redlock.
  • Controlled both sides, fully monitored, 12 V d.c. fail secure.
  • Dual handle controlled, both levers withdraw latch bolt when solenoid is activated.
  • 12 V d.c. fail secure (fail locked).
  • Continuously rated solenoid drawing 250 mA when the solenoid is activated.
  • Latch bolt monitoring – provides a micro-switch to indicate whether the latch bolt of the lock is projected or retracted.
  • Cylinder monitoring – provides a momentary contact microswitch to indicate the use of the cylinder to retract the bolt or the lock.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/B/1/3/4/2/A/B/D.
  • Incorporated in successful fire test and assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors.
  • Ten-year mechanical guarantee, one-year electrical guarantee.

- 9943P6:

  • Allgood Secure 99 Series vertical Euro profile solenoid redlock.
  • Controlled both sides, fully monitored, 24 V d.c. fail secure.
  • Both ‘controlled’ levers withdraw latch bolt when solenoid is activated.
  • 24 V d.c. fail secure.
  • Twin monitored.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/B/1/3/4/2/A/B/D.
  • Incorporated in successful fire test and assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors.
  • Ten-year mechanical guarantee, one-year electrical guarantee.

- 9944P5:

  • Allgood Secure 99 Series vertical Euro profile solenoid redlock.
  • Controlled both sides, fully monitored, 12 V d.c. fail safe.
  • Dual handle controlled, both levers withdraw latch bolt when solenoid is activated.
  • 12 V d.c. fail safe (fail unlocked).
  • Continuously rated solenoid drawing 250 mA when the solenoid is activated.
  • Latch bolt monitoring – provides a micro-switch to indicate whether the latch bolt of the lock is projected or retracted.
  • Cylinder monitoring – provides a momentary contact microswitch to indicate the use of the cylinder to retract the bolt or the lock.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/8/1/3/4/2/A/B/D.
  • Incorporated in successful fire test and assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors.
  • Ten-year mechanical guarantee, one-year electrical guarantee.

- 9944P6:

  • Allgood Secure 99 Series Vertical Euro Profile Solenoid Redlock
  • Controlled both sides, fully monitored, 24 V d.c. fail secure.
  • Dual handle controlled, both levers withdraw latch bolt when solenoid is activated.
  • 24 V d.c. fail safe (fail unlocked).
  • Continuously rated solenoid drawing 130mA when the solenoid is activated.
  • Latch bolt monitoring – provides a micro-switch to indicate whether the latch bolt of the lock is projected or retracted.
  • Cylinder monitoring – provides a momentary contact microswitch to indicate the use of the cylinder to retract the bolt or the lock.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/B/1/3/4/2/A/B/D.
  • Incorporated in successful fire test and assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors.
  • Ten-year mechanical guarantee, one-year electrical guarantee.

- 9945P5L:

  • Allgood solenoid redlock.
  • Outside left lever controlled and Inside lever free to escape, RTE function, fully monitored, 12 V d.c. fail secure. HANDED.
  • Single lever ‘controlled’ lever withdraws latch bolt when solenoid is activated and one ‘free’ lever always withdraws latch bolt.
  • 12 V d.c. fail secure (fail locked).
  • Continuously rated solenoid drawing 250 mA when the solenoid is activated.
  • Includes ‘request to exit function’ to indicate authorised exit to online access control system.
  • Latch bolt monitoring – provides a micro-switch to indicate whether the latch bolt of the lock is projected or retracted.
  • Cylinder monitoring – provides a momentary contact microswitch to indicate the use of the cylinder to retract the bolt or the lock.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/B/1/3/4/2/A/B/D.
  • Certifire approved CF 623.

- 9945P6L:

  • Allgood solenoid redlock. Outside left lever controlled and Inside lever free to escape, RTE function, fully monitored, 24 V d.c. fail secure. HANDED.
  • Single lever ‘controlled’ lever withdraws latch bolt when solenoid is activated and one ‘free’ lever always withdraws latch bolt.
  • 24 V d.c. fail secure (fail locked).
  • Continuously rated solenoid drawing 130 mA when the solenoid is activated.
  • Includes ‘request to exit function’ to indicate authorised exit to online access control system.
  • Latch bolt monitoring – provides a micro-switch to indicate whether the latch bolt of the lock is projected or retracted.
  • Cylinder monitoring – provides a momentary contact microswitch to indicate the use of the cylinder to retract the bolt or the lock.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/B/1/3/4/2/A/B/D.
  • Certifire approved CF 623.

- 9946P5L:

  • Allgood solenoid redlock. Outside left lever controlled and Inside lever free to escape, RTE function, fully monitored, 12 V d.c. fail safe. HANDED.
  • Single lever ‘controlled’ lever withdraws latch bolt when solenoid is activated and one ‘free’ lever always withdraws latch bolt.
  • 12 V d.c. fail safe (fail unlocked).
  • Continuously rated solenoid drawing 250 mA when the solenoid is activated.
  • Includes ‘request to exit function’ to indicate authorised exit to online access control system.
  • Latch bolt monitoring – provides a micro-switch to indicate whether the latch bolt of the lock is projected or retracted.
  • Cylinder monitoring – provides a momentary contact microswitch to indicate the use of the cylinder to retract the bolt or the lock.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/B/1/3/4/2/A/B/D.
  • Certifire approved CF 623.
  • Incorporated in successful fire test and assessed to BS EN 1634-1 and BS 476 Pt 22 up to 30 minutes on timber doors and 240 minutes on steel doors.
  • Ten-year mechanical guarantee, one-year electrical guarantee.

- 9946P6L:

  • Allgood solenoid redlock.
  • Outside left lever controlled and Inside lever free to escape, RTE function, fully monitored, 24 V d.c. fail safe. HANDED.
  • Single lever ‘controlled’ lever withdraws latch bolt when solenoid is activated and one ‘free’ lever always withdraws latch bolt.
  • 24 V d.c. fail safe (fail unlocked).
  • Continuously rated solenoid drawing 130 mA when the solenoid is activated.
  • Includes ‘request to exit function’ to indicate authorised exit to online access control system.
  • Latch bolt monitoring – provides a micro-switch to indicate whether the latch bolt of the lock is projected or retracted.
  • Cylinder monitoring – provides a momentary contact microswitch to indicate the use of the cylinder to retract the bolt or the lock.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/B/1/3/4/2/A/B/D.
  • Certifire approved CF 623.
  • Incorporated in successful fire test and assessed to BS EN 1634-1 and BS 476 Pt 22 up to 30 minutes on timber doors and 240 minutes on steel doors.
  • Ten-year mechanical guarantee, one-year electrical guarantee.

- 9945P5R:

  • Allgood solenoid redlock. Outside right lever controlled and Inside lever free to escape, RTE function, fully monitored, 12 V d.c. fail secure. HANDED.
  • Single lever ‘controlled’ lever withdraws latch bolt when solenoid is activated and one ‘free’ lever always withdraws latch bolt.
  • 12 V d.c. fail secure (fail locked).
  • Continuously rated solenoid drawing 250 mA when the solenoid is activated.
  • Includes ‘request to exit function’ to indicate authorised exit to online access control system.
  • Latch bolt monitoring – provides a micro-switch to indicate whether the latch bolt of the lock is projected or retracted.
  • Cylinder monitoring – provides a momentary contact microswitch to indicate the use of the cylinder to retract the bolt or the lock.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/B/1/3/4/2/A/B/D.
  • Certifire approved CF 623.

- 9945P6R:

  • Allgood solenoid redlock. Outside right lever controlled and Inside lever free to escape, RTE function, fully monitored, 24 V d.c. fail secure. HANDED.
  • Single lever ‘controlled’ lever withdraws latch bolt when solenoid is activated and one ‘free’ lever always withdraws latch bolt.
  • 24 V d.c. fail secure (fail locked).
  • Continuously rated solenoid drawing 130 mA when the solenoid is activated.
  • Includes ‘request to exit function’ to indicate authorised exit to online access control system.
  • Latch bolt monitoring – provides a micro-switch to indicate whether the latch bolt of the lock is projected or retracted.
  • Cylinder monitoring – provides a momentary contact microswitch to indicate the use of the cylinder to retract the bolt or the lock.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/B/1/3/4/2/A/B/D.
  • Certifire approved CF 623.

- 9946P5R:

  • Allgood solenoid redlock. Outside right lever controlled and Inside lever free to escape, RTE function, fully monitored, 12 V d.c. fail safe. HANDED.
  • Single lever ‘controlled’ lever withdraws latch bolt when solenoid is activated and one ‘free’ lever always withdraws latch bolt.
  • 12 V d.c. fail safe (fail unlocked).
  • Continuously rated solenoid drawing 250 mA when the solenoid is activated.
  • Includes ‘request to exit function’ to indicate authorised exit to online access control system.
  • Latch bolt monitoring – provides a micro-switch to indicate whether the latch bolt of the lock is projected or retracted.
  • Cylinder monitoring – provides a momentary contact microswitch to indicate the use of the cylinder to retract the bolt or the lock.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/B/1/3/4/2/A/B/D.
  • Certifire approved CF 623.
  • Incorporated in successful fire test and assessed to BS EN 1634-1 and BS 476 Pt 22 up to 30 minutes on timber doors and 240 minutes on steel doors.
  • Ten-year mechanical guarantee, one-year electrical guarantee.

- 9946P6R:

  • Allgood solenoid redlock. Outside right lever controlled and Inside lever free to escape, RTE function, fully monitored, 24 V d.c. fail safe. HANDED.
  • Single lever ‘controlled’ lever withdraws latch bolt when solenoid is activated and one ‘free’ lever always withdraws latch bolt.
  • 24 V d.c. fail safe (fail unlocked).
  • Continuously rated solenoid drawing 130 mA when the solenoid is activated.
  • Includes ‘request to exit function’ to indicate authorised exit to online access control system.
  • Latch bolt monitoring – provides a micro-switch to indicate whether the latch bolt of the lock is projected or retracted..
  • Cylinder monitoring – provides a momentary contact microswitch to indicate the use of the cylinder to retract the bolt or the lock.
  • UL listed and complies with ANSI 115.1. Suits standard ANSI preparation for metal doors.
  • Independently tested to BS EN 179 3/7/6/B/1/3/4/2/A/B and 3/7/6/B/1/3/4/2/A/B/D.
  • Certifire approved, CF 623.
  • Incorporated in successful fire test and assessed to BS EN 1634-1 and BS 476 Pt 22 up to 30 minutes on timber doors and 240 minutes on steel doors.
  • Ten-year mechanical guarantee, one-year electrical guarantee.

Third party certifications
  • Tested : Incorporated in successful fire test and assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors
  • ANSI: 115.1 : Allgood secure locks comply with ANSI 115.1
  • UL: Listed - R27527
Similar products from Allgood plc

© 2020 NBS Enterprises Ltd. All rights reserved.