RAVATHERM XPS X ULTRA 300SL

RAVATHERM XPS X ULTRA 300 SL

Primarily used for inverted flat roofs, green and blue roofs.

To EN13164

Thermal insulation products for buildings.

BBA, CE 13164

Euroclass E

To BS EN 13501-1. Products contain an ecologically safe flame-retardant additive.

300 kPa

To EN 826. To plan the reinforcement steel requirements of floor slab used as a load-distribution structure over the thermal insulation layer, please consult a structural engineer.

110 kPa

To EN 1606.

0.027 W/m·K

To EN 13164.

Insert requirements. 70 or 205 mm thickness dependent on required U-value and application.

1250 x 600 mm

The maximum installation depth of the thermal insulation is determined by the load: the horizontal pressure must not exceed the compressive strength of the boards, taking into account the value of the permanent load.

Ravatherm XPS X uses carbon dioxide as a blowing agent, which gives it an ozone-depleting potential (ODP) of zero and a Global Warming Potential (GWP) of less than five

Smooth

Smooth surface skin (extrusion skin) - A breathable, non-hygroscopic separation layer should be laid down with a 300-mm overlap, between the Ravatherm XPS X ULTRA 300 SL thermal insulation boards, laid in a brick bond pattern without adhesives, and the ballast (generally a layer of gravel).

Ship lap

A grooved edge allowing boards to overlap, minimizing gaps.

-50–75°C maximum

Provides the permanent application temperature of Ravatherm XPS X products. At higher temperatures, the boards will start to soften and suffer permanent deformation.