NBS Source
List your products
Description

Surface mounted, single sequential thermostatic shower valve with VR145 vandal resistant shower head and rigid riser pipe. Supplied complete with adjustable elbow kit, flow regulators and integral strainers.

Features:

  • Suitable for commercial and semi-domestic applications
  • Supplied with vandal resistant shower head and rigid riser pipe
  • Adjustable inlet fixing centres for easy replacement of most existing installations
  • Sequential operation from off - cold - warm.
  • Easy grip handle complete with durable, clear graphics
  • Robust construction to withstand heavy usage in public areas
  • Optional 6 L/min flow regulator for increased water saving. A 9 L/min flow regulator is also supplied

Approvals:

  • Buildcert TMV2 Scheme Approved.
  • HP-S High Pressure Showering.
  • LP-S Low Pressure Showering.
  • WRAS listed (Water regulations advisory scheme).
  • Designed, manufactured and supported in accordance with accredited BS EN ISO 9001:2008 Quality management systems and BS EN ISO 14001:2004 Environmental Management Systems.

General information
Color

Chrome

Features

Adjustable inlet fixing centres for easy replacement of most existing installations; Sequential operation from off - cold - warm; Easy grip handle complete with durable, clear graphics; Robust construction to withstand heavy usage in public areas; Optional 6 L/min flow regulator for increased water saving. A 9 L/min flow regulator is also supplied

Finish

Polished

Material

Body: Chrome Plated DZR Brass, Lever: Chrome Plated Zinc Die Casting, Riser: Polished Stainless Steel, Showerhead Body: Polished Chrome Plated Brass, Spray Plate: Engineering Plastic

Size

15

WarrantyDescription

Two years parts and labour as standard; Extended to five years parts and labour if commissioned by Rada. UK only

Uniclass 2015 Shower thermostatic water supply sets (Pr_40_20_87_81)
Specification data
Product Reference

Rada V10 Contract Pack (1.1651.008)

ProductInformation

www.radacontrols.com/onlinecatalog/pdf/p6244_1_rada_v10_shower_range_datasheet.pdf

Standard product features

Connections:

  • Inlets: 15 mm compression.
  • Outlet: ½” BSP Flat Face/ 15 mm compression.
  • Standard connections are: hot- left, cold- right, outlet- bottom or top.

Operation:

The Rada V10 is operated via a single sequential control which when rotated initially opens the valve, then increases temperature from cold to a pre-set maximum.

Temperature Range:

  • Temperature range from cold to preset maximum.
  • The maximum temperature that can be selected is factory set at approximately 41°C when despatched, but this can be reset on site if required (by an authorised person).
  • Thermostatic control ± 1°C within the range 35–45°C (assuming supplies of 15–65°C hot at nominally equal pressures).

Note: In the event of loss of either supply, the valve will automatically shut off. Minimum temperature of the blend to either supply is 12˚C.For reasons of general safety, hot water storage temperatures should be maintained at between 60–65˚C where serving ablutionary applications. The mixing valve can accept temporary excursions above 85˚C without damage, however operation at such elevated temperatures is not recommended.

Pressure/ Flow Rates:

Dynamic Supply Pressure (Running):

  • Minimum: 0.15 Bar.
  • Maximum: 5 Bar.
  • Maximum Static: 10 Bar.
  • The minimum flow rate to achieve a full spray pattern with the VR145 showerhead is 6 L/min.

Materials:

  • Body: Chrome Plated DZR Brass.
  • Lever: Chrome Plated Zinc Die Casting.
  • Riser: Polished Stainless Steel.
  • Showerhead Body: Polished Chrome Plated Brass.
  • Spray Plate: Engineering Plastic.

Digital objects
PlatformCompatibleVersionCertified to
Revit
Revit 2016 1 1.3
IFC
- 1 1.3
Download now from NBS National BIM Library