Basin mounted thermostatic mixing tap with long lever control.
A basin mounted thermostatic mixing tap with short or long lever control, and offering single sequential control from cold through to a pre-settable maximum temperature.
Taps are supplied complete with flexible supply tails, check valves, isolators and strainers.
Copper supply tails, Check valves, Isolators, Strainers
Two years parts and labour as standard; Extended to five years parts and labour if commissioned by Rada. UK only
N13/341 Vanity tops with formed washbasins
N13/346 Washing troughs
Rada Thermotap-3S (1.1555.101)
Rada Thermotap-3S Copper (1.555.061)
Rada Thermotap-3L (1.1555.011)
Rade Thermotap-3L Copper (1.1555.062)
|Standard product features|
Ranging between 26 mm to 36 mm.
Inlets: 15mm or ½" BSP male and 10 mm stainless steel flexible hoses (supplied).
Pressure/ Flow rates:
Note: The thermotap can accept temporary temperature excursions above 85°C without damage, however, operation at such elevated temperatures is not recommended. For safety reasons it is recommended that the hot water storage temperature is maintained at between 60°C and 65°C in ablutionary applications.
The full specification performance outlined below is achieved with a blend set between 35°C and 45°C, supplies of 15°C cold and 65°C hot with nominally balanced pressures.