NBS Source
RADA INTELLIGENT CARE - MX1 20CUK

RADA INTELLIGENT CARE - MX1 20CUK

Verified by manufacturer 4 months ago

Rada

Non-touch, intelligent thermostatic mixer tap.

Jump to:
+44 (0)344 571 1777 www.radacontrols.com

Application

Suitable for use where intelligent non-touch mixers are needed.

Description

Intelligent thermostatic basin tap with non-touch flow (IR) and temperature (capacitive) controls.


Features and benefits:

  • Check valve/filter unit.
  • Programmable temperatures and run time.
  • Automated blend duty flush and cold flush.
  • Thermal disinfection.
  • Non Touch IR flow control.
  • Non Touch capacitive temperature control.
  • Brass valve engine (no plastics).
  • Integral smooth bore copper outlet pipe.
  • Open bore flow insert, removable for easy cleaning.
  • Copper inlet tails.
  • High internal valve flow velocity.
  • Air tested at factory.
  • Programmable duty flushing / Thermal disinfection.
  • Integral 12 month data log.
  • Networkable using modbus RTU over RS485.
  • HTM04-01 Compliant.


Programming:

Programming via Rada App using iOS tablet over Bluetooth.

Blend Duty Flushing:

  • Operating modes: Off, Standard, Smart.
  • Activation time: Real time scheduling (hours/minutes).
  • Interval period: 1 hour - 1 Week.
  • Flush duration: 1 seconds - 25 minutes.
  • Set temperature: Programmable.

Cold Only Flushing:

  • Activation time: Real time scheduling (hours/minutes).
  • Interval period: 1 hour -1 Week.
  • Flush duration: 5 seconds - 10 minutes.

Thermal Disinfection:

  • Operating modes: Off, Standard, Exponential.
  • Flush duration: 1 - 30 minutes.
  • Minimum temperature: Programmable.

General information

Material

Brass

Length

155 mm

Width

63 mm

Height

175 mm

WarrantyDescription

Two year

Uniclass

Pr_40_20_87_03 Automatic-action thermostatic mixer tapsPrimary

CAWS

N11/350 Sinks, taps, traps and wastes

N11/30 Sinks, taps, traps and wastes

Product range

Intelligent Care
Healthcare

Specification data - Automatic-action thermostatic mixer taps

Standards

To EN 61558-2-16 (Power Supply).

Approval

Water Regulations Advisory Scheme (WRAS)-approved and TMV3.

Form

Automatic action thermostatic mixer taps.

Materials

-

Body

Brass.

Flow rate (maximum)

  • Modes: On/Off (Timed, Blocking).
  • Flow duration: Programmable (1 sec - 60 mins).

6 L/minute.

Flow regulator unit supplied.

Water supply temperature (maximum)

User-controlled with a programmable range of 33–45°C.

  • Factory pre-set: 39°C.
  • Factory pre-set temp. range - Min: 37°C, Max: 41°C.
  • Note: Full cold can be selected during programming.
  • Hot water temp: 55 - 65°C (max 80°C for disinfection).
  • Temperature check mode: Allows measurement of blend as well as hot and cold inlet supplies.

Integral accessories

Not required.

Rada ACI 2 (72981-NA) - Network Box.

Rada ACI 9 (76705-NA) - Extension Cable 2.5 m.

Rada ACI 11 (76715-NA) - Network End of Line Kit.

Operation

Flow: Infra red non-touch activation.

Temperature adjustment:

Capacitive sensor, allowing either non-touch adjustment by either holding or waving hand up to 35 mm above temperature graphic, or touch control, using the temperature graphic pads.

WaterPressureRange

Hot and cold supply pressures should be nominally equal.

Maximum static pressure, 10 bar; dynamic pressure range, 1.0-5.0 bar.

Connections

Basin hole diameter: 30–35 mm; Ware thickness (maximum): 38 mm; Copper tails: 10 mm self-coloured and open ended to allow cutting to desired length; Checkvalve / filter / flow regulator assembly with integral isolation: 1/2″ BSP / 15 mm compression.

Input voltage

Rated voltage: 100 Vac - 240 Vac, rated current: 1.0 A

Voltage

Rated voltage: 12 Vdc, rated current: 2.5 A.

Frequency

50/ 60 Hz.

Ingress protection (IP) rating

IP X4.

Network type

The MX1 Taps are networkable using modbus RTU over an RS485 connection.

This enables the MX1 Taps to be linked to a Building Management System (Refer to separate IC Networking Datasheet - P6480).

Projection

155 mm.

Water supply fittings

Water supply fitting programming options.

Blend temperature.

Duty flushing.

Cold only flushing.

Thermal disinfection.

Thermostatic Valve

Valve size (the size of the connection to the valve).

15 mm compression to inlet unit; 10 mm connection to rigid tail.

Digital objects

Platform Compatible Version Certified to
SketchUp
-

1

1

Revit
-

1

2.1
IFC
-

1

2.1
Download now from NBS National BIM Library

Similar products from Rada

RADA INTELLIGENT CARE - MX1 20F

RADA INTELLIGENT CARE - MX1 20F

RADA INTELLIGENT CARE - MX1 20NCUK

RADA INTELLIGENT CARE - MX1 20NCUK

RADA INTELLIGENT CARE - MX1 20NF

RADA INTELLIGENT CARE - MX1 20NF

RADA INTELLIGENT CARE - MX1 40CUK

RADA INTELLIGENT CARE - MX1 40CUK

RADA INTELLIGENT CARE - MX1 60NUK

RADA INTELLIGENT CARE - MX1 60NUK

RADA INTELLIGENT CARE - MX1 60UK

RADA INTELLIGENT CARE - MX1 60UK

RADA INTELLIGENT CARE - MX1 80NUK

RADA INTELLIGENT CARE - MX1 80NUK

RADA INTELLIGENT CARE - MX1 80UK

RADA INTELLIGENT CARE - MX1 80UK