1/2" exposed thermostatic mixing valve suitable for group showering incorporating a sealed cartridge. Please note this product requires separate outlet flow control.
A ½" surface mounted thermostatic mixing valve.
Radatherm service-free cartridge; Complete with check valves and strainers
Body: Chrome Plated DZR Brass
Two years parts and labour as standard; Extended to five years parts and labour if commissioned by Rada. UK only
S90/67 Thermostatic mixing valves
S90/680 Thermostatic mixing valves
Rada 215-T3 C (1.0.440.01.1)
Standard product features
The Rada 215-T3 C thermostatic mixing valve is supplied with integral strainers, check valves and a Radatherm service-free cartridge.
Units incorporate swivel elbows with 15 mm compression connectors, which can be converted to ½" BSP union if required.
The thermostatic mixing valve is approved for use in all UK healthcare premises.
The mixing valve does not have integral flow control: appropriate provision must be made for this in the outlet pipework.
Note: The mixing valve can accept temporary temperature excursions above 85°C without damage, however, operation of the mixing valve at such elevated temperatures is not recommended. For reasons of general safety, hot water storage supply temperatures should ideally be maintained at between 60°C and 65°C where serving ablutionary requirements.
Pressure/ Flow rates:
Rada 120 Mono-Control System
Rada 129 Mono-Control System
Rada 215-t3 bc Thermostatic Mixing Valve
Rada 215-t3 dk Thermostatic Mixing Valve
Rada 222-T3 DK
Rada 320 - C Thermostatic Mixing Valve
Rada 320 IC Thermostatic Mixing Valve
Rada 32RMX Temperature Controller
Rada 425 IC Thermostatic Mixing Valve