ProTherm RockFace A2 Upstand Insulation
Verified by manufacturer 2 months ago
BM Trada
Certificate type
BBA Agrément Certificate
Certificate type
Non-combustible upstand insulation board.
Application
Used to thermally insulate and protect upstand walls in inverted flat roof systems.
For use with inverted roofing waterproofing such as PermaQuik PQ6100, EshaFlex, EshaUniversal and ParaFlex.
For a comprehensive NBS J31 specification contact Radmat Building Products.
Description
ProTherm RockFace A2 is a non-combustible Upstand thermal insulation board.
Features and benefits:
- Classified Euroclass A2-s1,d0 to BS EN13501-1:2018 by WarringtonFire under classification report no. 19808F dated 10/10/2019.
- Building Regulation Approved Document B volume 1 – dwellings and volume 2 - non-dwellings compliant solution for buildings over 18 m high in England.
- Technical handbook – domestic Annex 2.C and Technical Handbook – non-domestic Annex 2.F compliant solution for buildings over 11 m high in Scotland.
- Manufactured with non-combustible stone wool it will not develop smoke or promote flame spread, even when directly exposed to fire.
- It also repels and drains water away from the product, and will completely dry out while maintaining its original physical properties.
- Stone wool and factory laminated to a 6 mm thick weather resistant high impact facing board.
- Available in a range of thicknesses.
- ProTherm RockFace A2 has a Zero Ozone Depletion Potential (ODP), a Global Warming Potential (GWP).
- Certificates: ISO 9001@2008 Quality Management System, ISO 14001 :2004 Environmental Management System, EPD as per ISO 14025 and EN 15804.
General information
Color | Grey |
Finish | Unfinished Manufacturer guidanceSkin. |
Material | Stonewool |
Shape | Rectangle |
Length | 2000 mm |
Width | 26 mm 36 mm 46 mm 56 mm 66 mm |
Height | 1200 mm |
Warranty description | 40 year |
Uniclass | |
CAWS | J31/334 Mineral wool insulation J42/425 Mineral wool (MW) insulation J41/26 Thermal insulation J42/27 Thermal insulation J31/26 Thermal insulation J21/25 Warm deck roof insulation |
Specification data - Mineral fibre slab insulation
Standard | Test standard to EN ISO 1716: 2010 and 13823: 2010+A1:2014. Classified to BS EN 13501-1:2018. |
Thermal conductivity (maximum) | W/mK. = 0.30/0.038.Manufacturer guidanceFacing/ Stone wool insulation: |
Thickness (minimum) | 56 mm.Guidance for specification option: 50 mm. 116 mm.Guidance for specification option: 110 mm. 142 mm.Guidance for specification option: 136 mm. Manufacturer guidanceOverall thickness specified for main value, Stone wool insulation thickness alone in respective guidance (allows 6 mm for the facing board). |
Density | 1320 kg/m³. |
Facing | High performance, heavy duty, exterior grade fibre-cement sheet with grey skin. |
Fire performance | A2-s1, d0.Guidance for specification option: Classified Euroclass A2-s1,d0 to BS EN13501-1:2108 by WarringtonFire under classification report no. 19808F dated 10 10 2019.
|
Ozone depletion potential | Zero. |
Global warming potential | <5. |
Green guide rating | A. |
Length x width | 2000 x 1200 mm. |
Weight | kg = 35.9/48.12/56. Manufacturer guidance(board/ m2 ) RF56/ RF116/ RF142: |
Flexural strength | 18 MPa. Manufacturer guidance(average Parallel and Transverse) |
Compressive Strength (at 10% deformation) | 30 kPa. Manufacturer guidanceBS EN 826 |
Nominal density | 110 kg/m³. Manufacturer guidanceStone wool only - BS EN 1602: |
Water absorption | Water repellent, to ASTM E136. |
Delamination | 13 kPa. |
Installation | Manufacturer's standard. Guidance for specification option: Install ProTherm RockFace A2 upstand board after completion of the PermaQuik PQ6100 or EshaFlex inverted roofing system. ProTherm RockFace A2 upstand board is bonded to the waterproofing using an Insta-Stik bead it is also trapped at the base by the horizontal ProTherm insulation board. As long as the ProTherm RockFace A2 upstand boards are well protected no additional attachment method is required unless the ProTherm RockFace A2 upstand board is more than 3 times the height of the horizontal ProTherm insulation board. Where the ProTherm RockFace A2 is more than 3 times the height of the horizontal ProTherm insulation board, and less than 750 mm in height, the ProTherm RockFace A2 upstand board must be trapped at the base by the horizontal ProTherm insulation board and have continuous retention across the top face of the board. Where the ProTherm RockFace A2 Board exceeds 750 mm above the roof finishes and is trapped at the base by the horizontal ProTherm insulation board the ProTherm RockFace A2 Board must be either:
Where it is necessary to cut ProTherm RockFace A2 upstand board to size use a TCT saw (suitable PPE must be used including a face mask to guard against dust). |
Edges | Square. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Europe |
Country of product manufacture | Europe |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 5 Manufacturer guidancek.g.CO2e= |
Recyclability | Yes |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 60 % |
Third party certifications
BM Trada
Short Form Classification Report No. 19808F
BBA Agrément Certificate
97/3336 PermaQuik PQ6100
Literature
ProTherm RockFace A2 Product Data Sheet
ProTherm RockFace A2 Fire Certificate
Similar products from Radmat Building Products Ltd
ProTherm RockFace A2 SL Soffit Insulation