Profiles XL Inverted Warm System
Verified by manufacturer over a year ago
A two-layer, high-performance, SBS-modified bitumen, torch-on flat roofing system.
Application
Suitable for direct application to non-combustible substrates only, such as concrete/ screed, or in overlay situations onto existing asphalt/ built-up roof (BUR) substrates. Specify Profiles T.A. System for combustible substrates such as plywood or OSB – consult manufacturer for details.
Description
Two-layer system incorporating a range of styrene butadiene styrene (SBS)-modified, elastomeric bitumen membranes and accessories.
Profiles Systems incorporate a ‘striped’ pattern. This advanced vapour release technology has been designed to dissipate moisture vapour that may be trapped in the roofing system. When this trapped moisture warms, it can form pressure pockets within the system. Low melt bitumen needs a minimal application of flame to activate its fast adhesive properties.
Components:
- Waterproofing.
- Separation layer: Icopal SLP 300.
- Insulation: Thermazone Hydroshield IVR.
- Filtration layer: Monarperm 700 Water Reducing Layer.
- Ballast.
Application:
Suitable for direct application to non-combustible substrates only, such as concrete/ screed, or in overlay situations onto existing asphalt/ built-up roof (BUR) substrates. Specify Profiles T.A. System for combustible substrates such as plywood or OSB – consult manufacturer for details.
General information
Specification data - Reinforced bitumen membrane inverted roof covering systems
Product Reference | Profiles XL Inverted Warm System |
Primer | Icopal Siplast Bitumen PrimerGuidance for specification option: Quick-drying primer for torch-applied membranes. |
Underlay | Profiles Vent XLGuidance for specification option: Torch-applied membrane with stripes on underside to provide partial bond. Profiles XL SandGuidance for specification option: Fully bonded torch-applied membrane. |
Top layer/ Capsheet | |
Type | Profiles XL Sand CapsheetGuidance for specification option: Torch-applied capsheet. |
Flashings and detail work | |
Underlay | Icopal T.A. Detailing UnderlayGuidance for specification option: 3 mm self-adhesive underlay. Profiles XL SandGuidance for specification option: 4 mm torch-applied membrane. |
Capsheet | |
Type | FireSmart T.A Detailing CapsheetGuidance for specification option: Self-adhesive capsheet. Profiles XL Mineral CapsheetGuidance for specification option: Torch-applied capsheet. Thermaweld CapsheetGuidance for specification option: Torch-applied capsheet. |
Colour | Blue-greyBrownGreen |
Accessories | NoneIcopal GRP Edge TrimsIcopal Lightning Conductor PadsIcopal Roofgard Cable and Tube DuctIcopal Roofgard Cowled Telescopic VentIcopal Roofgard OutletIcopal Roofgard Parapet Outlet |
Product Options | Preparation: Consult Icopal Ltd for details of the preparation and priming of the intended roof structure and substrate, and for details of the requirements for preparation layers, venting layers, nailing layers and taping strips. System build-up: Consult Icopal Limited’s technical literature for details and guidance. Icopal Limited is also able to offer a design and specification service, and it is recommended that they are consulted early on in the design process. |