NBS Source
List your products

This product is no longer available

Application

Can be applied by brush, roller or conventional spray. Can be used for:

  • Unsealed and undecorated concrete.
  • Cellular concrete.
  • Masonry.
  • Natural stone.
  • Cement.
  • Stucco/ render.
  • Brick substrates.

Keep the gun at least 10 cm away from the substrate when spraying. Only apply in temperatures above 7°C and relative humidity <75%. Do not apply in direct sunlight.

Ensure surfaces to be painted are sound, clean, dry and free from defective or poorly adhering materials such as dirt, grease and wax before application. Not suitable for use on previously decorated or sealed surfaces.

Description

Exterior waterproofing coating, which has been specifically formulated to reduce water ingress into substrates without sealing the surface, helping substrates to breathe and dry-out, maximizing their thermal efficiency.

Features and benefits:

  • Reduces moisture intrusion.
  • Permeable to water vapour (and highly breathable).
  • Clear coating provides invisible exterior protection.
  • Reduces risk of damage from rain and freeze and thaw cycles, helping buildings to maintain their natural beauty.
  • Algae and moss resistant due to the nature of the hydrophobic surface.
  • Water-based and quick drying.
  • Provides up to 10 years durability.
  • Resistant to UV damage.
  • Recoatable with exterior masonry paints after a minimum of six months.
  • Certified by the BBA and tested by the BRE.

Applications:

Can be applied by brush, roller or conventional spray. Can be used for:

  • Unsealed and undecorated concrete.
  • Cellular concrete.
  • Masonry.
  • Natural stone.
  • Cement.
  • Stucco/ render.
  • Brick substrates.

Keep the gun at least 10 cm away from the substrate when spraying. Only apply in temperatures above 7°C and relative humidity <75%. Do not apply in direct sunlight.

Ensure surfaces to be painted are sound, clean, dry and free from defective or poorly adhering materials such as dirt, grease and wax before application. Not suitable for use on previously decorated or sealed surfaces.

General information
Size

10 L

Uniclass 2015
Pr_35_31_68_33 Fungicidal coatingsPrimary
CAWS

M60/175 Protective coating

M60/18 Special coating

Specification data - Fungicidal coatings
Product Reference

Plus Smartshield+

Standard product features

Size:

10 L.

Composition (nominal):

Pigment free, low viscosity, water-based liquid, ready to use.

Coverage (approximate):

  • Porous concrete: 1.2 L/m².
  • Prefabricated concrete: 0.15–0.4 L/m².
  • Cellular concrete: 1.2 L/m².
  • Brickwork: 0.5–1 L/m².

Drying time (at 20°C, 65% RH):

  • Touch dry: 1–2 hours.
  • Recoat: After 30 minutes.

Film properties:

  • Heat resistance: Not suitable for use on heated surfaces.
  • Water resistance: Resistant to the levels of atmospheric humidity normally experienced in exterior environments.

Technical characteristics:

  • Colour: Clear when dry.
  • Solids content: By weight: Approximately 7.5%; by volume: Approximately 8.2%.
  • Thinning: Ready for use, do not dilute.
  • VOC content: 3 g/L (0–0.29%).

Product Options

Literature
Similar products from Dulux Trade, brand of AkzoNobel