NBS Source
List your products
Description

A range of glazing bars and accessories to suit solid and multiwall polycarbonates and plastics. Incorporates features recommended for two edge support glazing.

Suitable for canopies, covered walk-ways, verandahs, terraces, smoking shelters, station roof and platform glazing fixing to supporting members by others.

Features:

  • Wider rebates for improved retention of infill.
  • Bomb-blast Mitigation accessories available.
  • Gaskets chemically compatible with polycarbonate.

Specification data
Product Reference

PlasGard

Extruded aluminium inverted ‘T’ bar with continuous screw on capping and gasketry.

Type

PLM15

Aluminium ‘T’ bar framing. Maximum recommended span: 1500 mm (polycarbonate glazing only).

PLM17

Aluminium ‘T’ bar. To special order. Maximum recommended span: 2500 mm (polycarbonate glazing), 2000 mm (single glazing).

PLM20

Aluminium ‘T’ bar framing. Maximum recommended span: 4000 mm (polycarbonate glazing), 3400 mm (single glazing).

PLM50

Aluminium 'T' bar. Maximum recommended span: 5000mm (polycarbonate glazing), 4400mm (single glazing).

Glazing bar -
Finish/ Colour

Mill finish

Standard.

Polyester powder coating, BS colour ___

Polyester powder coating, RAL colour ___

Polyester powder coating, Syntha Pulvin colour ___

Film thickness (minimum)

Not applicable

Mill finish.

40 microns

Spacing

600 mm nominal

For glazing.

700 mm nominal

For polycarbonate.

Slope

___°

Minimum 15°.

Bottom overhang lap

___ mm

75 mm

Nominal.

Infill

6 mm clear toughened glass

6mm solid polycarbonate

6.4mm clear laminated glass

6.8mm clear laminated glass

7 mm wired safety glass

7.5mm clear laminated glass

8.8mm clear laminated glass

16 mm multi-wall polycarbonate sheet blown free of swarf and taped both ends

25 mm multi-wall polycarbonate sheet blown free of swarf and taped both ends

Incorporated components

None

End bar wing

GlazaTherm Top hung opening rooflights with cord

GlazaTherm Top hung opening rooflights with electric motors

GlazaTherm Top hung opening rooflights with factory fitted pole

Bomb Blast Mitigation accessories to top and bottom of glass

Standard product features

Material to BS 1474:

Aluminium alloy, 6063-T6.

Product Options

Finish and colour:

A range of architectural finishes available, including polyester powder coating to BS 6496 in standard RAL, Syntha Pulvin or BS colour ranges.

Infill:

Other specifications are available including solar control, tinted or diffused glass and photo-voltaic panels.

Spacing:

Generally up to and including 750mm, but wider centres can be accommodated in some circumstances.

Spans are for guidance only and structural calculations should be carried out accordingly.

Similar products from Lonsdale Patent Glazing & Rooflights