NBS Source
List your products
Application

  • Petrochemical and construction sites.
  • Stadia.
  • Ports and harbours.
  • Government buildings and embassies.

Description

Full-height pedestrian gate for external installation. Hand-operated to be installed alongside RotaSec lanes.

Available with manual or electric lock options. Aesthetic and robust design available with 1100 mm passageway for wheelchair or disable/ service access. Passage in both directions via handle and mechanical lock. With electric lock option, passage electronically controllable. On receiving a signal from the access control system or push button, the unit will unlock for a few seconds to allow passage. If no passage takes place, the unit will automatically lock.

Supplied in a kit form, the range includes painted and stainless steel finish. Customization is also an option. PedGate complements both the RotaSec BA and RotaSec EV units.

An optional 50 mm diameter LED display pictogram with illuminated symbols integrated into the reader box is available.

Features and benefits:

  • Leave aisle timeout (with electrical lock option).
  • Anti-crawling barrier.
  • Manually operated door leaves.
  • Logic voltage 24 Vac (electric lock option).
  • Anti-pinching design construction.
  • With the mechanical look, in the case of a power-off scenario, the gate remains locked if this was the status before the power-off event. With the electric lock option, the gate can be pushed open (fail open), or can be factory set to remain locked as an option if desired (fail lock).

Applications:

  • Petrochemical and construction sites.
  • Stadia.
  • Ports and harbours.
  • Government buildings and embassies.

General information
Color

Grey, white, black, green

Features

Manually operated door leaves, anti-crawling barriers, voltage free contact input for fire alarm fail stair, anti-pinching design, fail-safe rotar freely rotates in power off scenario

Finish

Leaf, frame, hinges and lock, handle

Material

Stainless steel

Size

2172 x 1372 x 175 mm

Uniclass 2015
Carbon steel vertical section gate leaves (Pr_30_59_33_15)Primary
Specification data - Carbon steel vertical section gate leaves
Product Reference

PedGate

Type

Left hand opening

Option.

Right hand opening

In the entrance direction of transit (from unsecure side), the hinges are mounted on the right-hand frame side.

Material/ Finish

Painted grey, RAL 7004

Stainless steel 1.4301 (304) grade

Stainless steel 1.4401 (316) grade

Accessories

None

Additional infill horizontal bars

For increased security.

Canopy

Card reader integration

Electric lock

Remote control system

Standard product features

Size (overall h x w x l):

2172 x 175 x 1372 m. 2393 mm high with optional bar infill to match RotaSec. 2620 mm high with optional canopy. Additional 8 mm if installed adjacent to a RotaSec with the base plate option.

Passage height:

2100 mm.

Weight:

85 kg (add 15 kg with optional infill bars; add 70 kg for canopy option).

Technical characteristics:

  • Power supply: 230 VAC (50Hz). [25 VA electric lock option].
  • Operating temperature: -5 to + 50°C. 95% no condensing relative humidity.
  • Flow rate (approximately): 12, 15 or 17 passages per minute, depending on type of access reader used (insertion, swipe or proximity).
  • Cabling and conduit: Through the ground.
  • Control board location: In the roof.
  • IP rating: IP44.
  • Noise level: < 55 dB.
  • Mean cycle between failure (MCBF): 3 million cycles.
  • Mean time to repair (MTTR): <30 minutes.

Product Options

Material/ Finish:

Available in painted and stainless steel finishes. Any RAL is available on request.

Optional canopy with aluminium frame and transparent or solid polycarbonate infill with stainless steel interface to connect to the main structure, to match with RotaSec BA or EV models. Standard finish includes:

  • Leaf: Corrosion-protection painted grey or stainless steel 1.4301 [304] grade. (1.4401 [316] grade optional).
  • Frame: Corrosion-protection painted grey or stainless steel 1.4301 [304] grade. (1.4401 [316] grade optional).
  • Hinges/ lock: Steel, painted black.
  • Handle: Stainless steel.

Digital objects
PlatformCompatibleVersionCertified to
Revit
- 1 2.1
IFC
- 1 2.1
Download now from NBS National BIM Library