Open Spring Mounts

Description

Open spring mounts are typically used for applications where low frequency (sub 8Hz) vibrations are present, such as mechanical equipment. We can provide acoustic spring mounts with up to 150mm deflection in a variety of designs to suit a variety of installations, such as where there are wind loads or where equipment moves in different patterns, for example during an engine start/stop cycle. Typical acoustic spring mount installations include floors and ceilings subject to impact, plant equipment inertia bases, mechanical and electrical equipment isolation and protection of sensitive instrumentation. Spring can be selected so that the load capacity is as low as 20kg, all the way up to 1331kg for single spring variants. Higher capacities can be achieved by utilising multiple springs in a single housing.

General information

Features

Rust resistant dependent on size and method of attachment

Finish

Zinc chromate, neoprene dipping, cold galvanized paint, epoxy finish, hot dipped galvanised holders with electro galvanized or cadmium plated hardware

Size

54 x 54 x 108 mm

Uniclass 2015

Pr_80_77_94_84 Spring isolatorsPrimary

Digital objects

Platform Compatible Version Certified to
IFC
-

1

2.1
Revit
-

1

2.1
Download now from NBS National BIM Library

Similar products from Mason UK Ltd

FS Sprung Jack-Up Floor

FS Sprung Jack-Up Floor

FSN LDS Rubber Jack-Up Floor

FSN LDS Rubber Jack-Up Floor

MFS Lightweight Floating Floor

MFS Lightweight Floating Floor

Restrained Spring Mounts

Restrained Spring Mounts

Spring Isolation Bearings

Spring Isolation Bearings

Spring Mounted Inertia Bases

Spring Mounted Inertia Bases