Nitoflor FC150 is used to provide a hard wearing, easily cleaned, attractive floor coating in industrial areas where high resistance to chemical attack and an abrasion resistant floor finish is required. It is suitable for use in production assembly areas, workshops, dairies, soft drinks production and bottling plants, breweries, kitchens, showrooms and internal car parks. It is particularly suitable in wet working areas and where chemical spillage is likely, e.g. plating shops, processing plants and dye works.


  • Hard wearing: Durable, low maintenance costs.
  • High resistance to a wide range of industrial chemicals.
  • Hygienic: Impervious finish provides easily cleaned surface.
  • Solvent free: No odour during application.
  • Attractive: Available in a range of colours to improve the working environment.
  • Slip resistant: Different textures available to suit conditions.

General information

Uniclass 2015

Pr_35_31_68_70 Resin floor coatingsPrimary


M12/10 Resin flooring

M12/110 Resin flooring

Specification data - Resin floor coatings

Product Reference

Nitoflor FC150


Brick red


Dark grey

Light grey

Powder blue

Sage green

Silver grey

Standard product features

Technical characteristics (to EN 13813):

  • Reaction to fire: NPD.
  • Compressive strength: C80.
  • Flexural strength: F50.
  • Wear resistance: AR0,5.
  • Bond strength: B2,0.
  • Impact resistance: IR10.
  • Chemical resistance: CR1-14 (class I).

Physical properties:

  • Pot life: 50 minutes.
  • Tack-free time: 1.5–2 h.
  • Time between coats: 6–18 h.
  • Full cure: Seven days.
  • Dry film thickness (each coat, approximate): 250 microns.
  • Dry film thickness (two coats, approximate): 500 microns.
  • Light traffic use after: 24 h.
  • Full traffic use after: 48 h.

Product Options

Surface finish/ treatment:

Nitoflor FC Anti-slip Grains can be added towards the end of the mixing process if required.

Similar products from Fosroc International Limited

Nitoflor FC130

Nitoflor FC130