A range of high quality clean water pumps.
Primarily designed to be used with Newton sump systems for the removal of ground water collected by Newton System 500 basement waterproofing system. Newton NP pumps can also be used for the removal of water from:
The Newton NP400 and NP750 are a range of high quality clean water pumps, suitable for the removal of ground water from basements and cellars.
The unique vertical operation float switch ensures that the pumps operate within their footprint, removing the possibility of the float snagging during operation and allowing the pumps to be used within smaller sumps. The vertical float switch is also very flexible, allowing the pump switching height to be adjusted both in terms of the height between the ‘on’ and ‘off’ positions, as well as the height relative to the pump.
The Newton NP400 is suitable for use with Newton Victron Power Inverter 12/1200/50 to give continual pumping even during power outage, while the Newton NP750 can be used with the Newton Victron Power Inverter 12/3000/125.
Supplied in both manual and automatic versions and can be purchased as pumps only, or as a key component in Newton packaged pumping systems.
Features and benefits:
Applications:
Primarily designed to be used with Newton sump systems for the removal of ground water collected by Newton System 500 basement waterproofing system. Newton NP pumps can also be used for the removal of water from:
Material | Body: Stainless steel and cast aluminium Shaft: Grade 403 stainless steel |
Uniclass 2015 | |
CAWS | R12/135 Private packaged pumping stations and pressure pipeline system R18/310 Private packaged pumping stations |
Product Reference | Newton NP400 Clean Water Pump (P2)High head and high to medium performance pump. Automatic switching. Newton NP400 Clean Water Pump (P3)High head and high to medium performance pump. Manual switching. Newton NP750 Clean Water Pump (P5)High head and high performance pump. Automatic switching. Newton NP750 Clean Water Pump (P6)High head and high performance pump. Manual switching. |
Pipework | 50 mm pressure rated63 mm pressure ratedFor NP750 only. Consult manufacturer for details. |
Battery back-up | Not RequiredMultiPlus 12/1200/50 (BB2)Battery back-up facility for pumps of 400 W. MultiPlus 12/3000.120 (BB3)Battery back-up facility for pumps of 750 W. Quattro 12/3000/120 (BB4)Battery back-up facility for all pumps up to 750 W. |
Power converter | 1200 W (C1)Battery back-up facility for pumps of 150 W and 400 W. 1200 W (C3)As C1, including a 115 A/H deep cycle leisure battery, a secure battery box, and the power leads for connection to the mains and the battery 3000 W (C2)Used with single pumps with power outputs of up to 750 W only or with dual pumps of 400–750 W when switched by a Newton Control Panel. 3000 W (C4)As C2, including a 115 A/H deep cycle leisure battery, a secure battery box, and the power leads for connection to the mains and the battery. |
Standby batteries | Northstar NSB 100FT (BB21)Northstar NSB 190FT (BB22) |
Control panel | Newton Control Panel Pro (CP2)Supplied with a vertical water level float switch and water high alarm float switch. Newton Control Panel Pro & pre-fitted Newton Dialer (CP7)Supplied with a vertical water level float switch and water high alarm float switch. Newton Pump Controller (CP9)Supplied with a vertical water level float switch and water high alarm float switch. Sewage Control PanelTwin pump panel with alarm for sewage systems. |
High water level alarm | 9 V battery (PA50)Switch not suitable for regular contact with sewage. |
Text and speech dialler | Not requiredNewton Dialer (PA5)Can send either text or voice messages to up to five designated phones should an alarm condition occur. |
Standard product features | Size (l x w x h):
Weight (dry):
Material:
Technical characteristics:
|
Product Options | Power converter: The Victron Inverter/ Charger units draw 12 V power from a single or a bank of 12 V batteries which is inverted into clean, pure sine wave, 230 V power to ensure that the Newton Pump continues to operate even during a power outage. Control panel: The panel features interface for use with Newton battery back-up and telemetry systems as well as connections to whole house alarm and monitoring systems. The control panel PCB is split with two separate circuits, ensuring that pumping will continue even if one of the control circuits should fail. |
Newton Control Panel Pro (CP2 / CP7)
Newton CP Clean Water Pumps (P31, P32 and P33)
Newton High Water Alarm (PA50)
Newton NP Effluent Water Pumps
Newton NP400 LLPS (SP1)
Newton Pump Controller (CP9)
Newton SP750 Cutter Sewage Pump
Newton Titan-2 (T21-T31)
Newton Titan-Pro – Packaged Pumping System
Newton Trojan-Pro