NBS Source
I'm a manufacturer

High Build Epoxy Top Coat Floor Coating - High Build Epoxy Floor Coating

Verified by manufacturer 2 months ago

Newton Waterproofing Systems Third party certifications:
  • DoP

    DoP

    Certificate type

Two-component solvent-free epoxy resin-based floor coating developed to provide protective & decorative properties to concrete, steel and other substrates.

Jump to:
+44 (0)1732 360095 Website

Application

As a waterproof, tough, chemical-resistant floor coating or as an internal lining for concrete or steel storage tanks containing oils, chemicals, water etc. Epoxy Top Coat is particularly suitable for chemical bunds.


Epoxy Top Coat is suitable for use in:

  • Plant rooms
  • Food preparation areas;
  • Breweries;
  • Abattoirs;
  • Bottling factories;
  • Manufacturing areas;
  • Industrial units;
  • Warehouses;
  • Aircraft hangers.


Consult manufacturer's literature for relevant mixing, surface preparation and application instructions.

Description

After mixing together, an easily applied chemical and abrasion-resistant finish is produced.


Features and benefits:

  • Solvent-free, low odour.
  • Provides a fully sealed surface with good chemical resistance.
  • High level of adhesion to concrete and steel.
  • High build.
  • Tough and durable.
  • Easily applied.
  • Hygienic and easily cleaned.
  • Can be applied via brush, short piled roller, or airless spray.
  • If a non-slip finish is required, broadcast an appropriate Silica Sand immediately after the first coat - consult manufacturer for further details.

General information

Color

Grey

Red

Manufacturer guidance

Component A: Grey; component B: Milky white, Finish: colour (when cured): Grey.

Finish

Gloss

Material

Liquid

Guidance for specification option:

Solvent free epoxy resin

Shape

Other

Uniclass

Pr_35_31_06_38 High-build floor coatingsPrimary

CAWS

M60/180 Floor coating

Product range

Coatings

Specification data - High-build floor coatings

Colour

Grey.

Specific gravity

1.6.

Shelf life

12 months.

Pot life at 10°C and Relative Humidity (RH) of 40%

60 minutes.

Application rate - First coat over primer

0.25 kg/m².

Application rate - Further protective coats

0.25 kg/m².

Application method

Brush, roller or squeegee.

Minimum application temperature - substrate

+5 (and rising) °C.

Maximum application temperature - air

+30 °C.

Odour

Slight ammonia.

VOC content

Below 100 g/L.

Membrane thickness - First coat over primer

0.15 mm.

Membrane thickness - Further protective coats

0.15 mm.

Impact resistance - Class 2

14 Nm.

Resistance to dilute acid/alkaline

Excellent.

Shore Hardness - D

82.

Slip resistance

F.

Sustainability data

Contains Red List materials

Yes

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Recyclability

0

Third party certifications

DoP

DoP

NewCoat 701-HB DoP

Literature

Newton NewCoat 701-HB

Newton NewCoat 701-HB

Case studies

Warwick Court Redevelopment, London

Warwick Court Redevelopment, London