Newton 603 Tile
Application

  • Decoupling of the tiled floor from the substrate below.
  • Tiled or paved floors.
  • Floor builds that include underfloor heating systems.

Description

Newton 603 Tile is a composite decoupling mat with an installation height of 3 mm. The blue LDPE (low-density polyethylene) dimpled core has a polypropylene fleece heat-welded to both the upper and lower surfaces, which quickly absorbs adhesives to provide an exceptional bond to both the substrate below and the tiled floor finish above. The material is also elastic and highly impervious to the diffusion of water vapour.

The decoupling mat isolates the finished floor surface from any cracking or movement within the substrate and provides improved distribution and relief from compressive stress acting on specific points on the floor. Furthermore, the interconnecting air channels around the dimples ventilate the substrate below to equalise vapour pressure.

Newton 603 Tile is guaranteed against deterioration for 30 years, has a life expectancy of at least 50 years (DIN 9001:2000), and is inert with good compressive stability. It is highly resistant to water, alkalines, saline solutions and organic acids, and is not affected by minerals. It is also resistant to bacteria, fungi and other small organisms.

Features and benefits:

  • Accommodates movement and prevents the transfer of stresses from the substrate to the tiled surface.
  • Adds only 3mm to the floor finishes.
  • Effective air and vapour barrier if joints are sealed.
  • Lightweight and easy to install.
  • Loadbearing, tough and durable.

Accreditations and approvals:

Newton 603 Tile is independently tested by SKZ TeConA GmbH to confirm performance data to the requirements of DIN EN 13967:2012 in accordance with the EU Construction Products Regulations. Please see the CE Label or the products’ Declaration of Performance for further information.

In addition to the above, Newton 603 Tile has been tested for the Determination of the Thermal Conductivity to BS EN 12667:2001 which confirmed a thermal conductivity of 0.0369 W/mK.

Suitable Substrate:

  • Solid floors of concrete or screed.
  • Ventilated timber floors.

Application:

  • Decoupling of the tiled floor from the substrate below.
  • Tiled or paved floors.
  • Floor builds that include underfloor heating systems.

General information

Finish

Grey, fleeced surface ready for tiling onto

Features

Accommodates movement and prevents the transfer of stresses from the substrate to the tiled surface, low thermal conductivity of 0.0369 W/mK

Shape

3 mm thick sheet tiling membrane

Size

Roll size: 1 m x 30 m. Approximately 3.4 mm thick

WarrantyDescription

Newton 603 Tile is supplied with a product warranty of 30 years. Please note that this is not a guarantee. The installation guarantee is provided by the installing contractor

Uniclass 2015

Pr_25_57_65_60 Plastics sheetsPrimary
Specification data - Plastics sheets

Product Reference

603 Tile

Standard

EN 13967:2012

Material

-

Studded layer

Low-density polyethylene (LDPE)

Filter layer

Polypropylene

Stud height

Approximately 3 mm

Packaged weight

17 kg

Performance

-

Fire performance

F – Not tested

Area weight

550 g/m²

Dimple spacing

2500 per m²

Air gap between dimples

1.56 l/m²

Installation temperature range

No restriction

Service temperature range

-40°C to +80°C

ThermalConductivity

0.0369 W/mK

Standard product features

Colour:

Dimpled sheet: Blue, Fleece: White.

Features:

Accommodates movement and prevents the transfer of stresses from the substrate to the tiled surface, low thermal conductivity of 0.0369 W/mK.

Finish:

Grey, fleeced surface ready for tiling onto.

Material:

Decoupling mat for tiling.

Shape:

3 mm thick sheet tiling membrane.

Size:

Roll size: 1 m x 30 m. Approximately 3.4 mm thick.

Warranty description:

Newton 603 Tile is supplied with a product warranty of 30 years. Please note that this is not a guarantee. The installation guarantee is provided by the installing contractor.

Red Listed materials:

According to Regulation EEC 1999/45, 67/548 and EC 1907/2006 polyethylene belong to non-toxic

Country of origin:

UK.

Similar products from Newton Waterproofing Systems