Compare

DampSafe 601 Slimline - Flat Loose Laid High Grade Flooring Membrane

Third party certifications:

DoP
Certificate type

A high-grade flooring membrane used primarily for isolating moisture sensitive flooring from dampness in the floor slab.

Jump to:

+44 (0)1732 360095 www.newtonwaterproofing.co.uk

Application

To protect flooring from not yet cured slabs.
Above contaminated floors.
As a high grade damp-proof membrane (DPM).
As the damp proof floor membrane for use with Newton coatings damp proofing wall membranes.
Can be used as the flooring membrane within a Newton external waterproofing & drainage membranes waterproofing specification.

Description

A high-grade flooring membrane used primarily for isolating moisture-sensitive flooring from dampness in the floor slab. It can be used as the floor membrane as part of Newton external waterproofing & drainage membranes when the survey has ascertained that no risk of water entering through the body of the slab.

The product allows for the installation of sensitive flooring to be laid above ‘green’ still curing concrete as soon as the concrete is walkable, usually two days, significantly reducing project times.

Guaranteed against deterioration for 30 years and has a life expectancy of at least 50 years.

DampSafe 601 Slimline can be finished over with screed, 18 mm or 22 mm tongue and groove chipboard, or particle board. Laminate and timber flooring should be installed over a layer of 18 mm or 22 mm tongue and groove chipboard. Sports floors are also suitable - consult manufacturer for details.

Consult manufacturer's literature for relevant surface preparation recommendations.

Features and benefits:

Can be installed above slabs that are not yet cured, and as soon as the concrete is walkable.
Able to resist very high compressive loading.
Can be installed as a high-load DPC within structural block walls.
Inert and highly resistant to water, alkalis, hydro-carbons, saline solutions and organic acids.
Not affected by minerals, and resistant to bacteria, fungi and other small organisms.

General information

Color	Grey
Finish	Smooth Thin, dimpled membrane.
Shape	Other
Length	20000 mm
Width	2080 mm
Height	2000 mm
WarrantyDescription	Newton 601 Slimline is guaranteed against deterioration for 30 years and has a life expectancy of at least 50 years (DIN 9001:2000).

Uniclass	Pr_25_57_51_74 Rubber studded sheetsPrimary
CAWS	J40/290 High-density polyethylene/ polypropylene studded cavity drain membrane J40/47 High-density polyethylene/ polypropylene studded cavity drain membrane

Product range	Sheet Flooring Membranes

Specification data - Rubber studded sheets Enhanced data

Material	-
Studded layer	HDPP.
Third-party certification	To SPF VN 2200, EN ISO 25619-1, EN 12667, BS EN 1931, BS EN 13501-1 and to EN 1296 and EN 1928-B.
Stud height	1.0 mm.
Weight (minimum)	19.75 kg.
Colour	Grey.
Performance characteristics	-
UV resistance	Do not store in direct sunlight.
Fire performance	To BS EN 13501-1: Euroclass F.

Density	470 g/m².
Area	40 m².
Height	2.0 mm.
Vicat softening temperature	148.
Packaged weight	19.75 kg.
Service temperature	-20°C to +80°C.
CompressiveStrength	>1000 kPa.
Compressive strength - Permanent loading	100 kPa.
ThermalConductivity	0.480 W/mK.
Water vapour diffusion resistance – Sd value	200m.
Water vapour diffusion resistance – µ value	400 000 µ.
Water vapour diffusion resistance	1000 MNs/g.
Resistance to fire	Euroclass F.
Chemical resistance	Good.
Third-party certification	SP Technical Research Institute of Sweden, 0402-CPD-45 59 01.