NBS Source
I'm a manufacturer

Newton HydroBond 314 Hydrophilic Detailing Bentonite Granules - Bentonite Granules

Verified by manufacturer 2 months ago

Newton Waterproofing Systems

Naturally occurring sodium bentonite granules ideal for detailing to the Newton HydroBond System where HydroBond 403 Plus terminates to building elements

Jump to:
+44 (0)1732 360095 Website

Application

Suitable for use on both new and remedial waterproofing projects, including:


  • Can be mixed with clean fresh water to seal parts of Type A and B waterproofing systems where a reinforced concrete construction is used;
  • Sealing of pipes, sleeves, columns and posts that penetrate the Newton HydroBond System;
  • Between the horizontal and vertical application of HydroBond 403 Plus to irregularly shaped interfaces such as piled walls;
  • Can be poured into an inverted fillet formed within the blinding as a termination detail where horizontal HydroBond 403 Plus terminates at elements that are not to be further waterproofed;
  • Sealing cored holes within Type B construction in conjunction with suitable Newton repair mortars to confine the product.

Description

Suitable for detailing to the Newton HydroBond System where HydroBond 403 Plus terminates to building elements such as piled walls, support piles, pile caps, and protrusions through the membrane.


Bentonite is an absorbent clay formed millions of years ago from volcanic ash. There are different types of bentonite but all expand to an extent when hydrated. The sodium bentonite in HydroBond 314 Bentonite Granules can absorb many times its mass in water.


The property of swelling on contact with water makes sodium bentonite useful as a sealant since it provides a self-sealing, low permeability barrier. When in contact with water, HydroBond 314 Bentonite Granules swells up to 15 times its initial size to form a dense, water impermeable paste. When confined, the swell is controlled, forming a dense waterproofing component that fully seals these otherwise difficult to detail joints against water ingress.

Consult manufacturer for details on surface preparation.


Features and benefits:

  • Hydrophilic - swells to 15 times its initial size when contacted by water.
  • High resistance to water pressure.
  • Easily applied by hand.
  • Cost is much less than modern polymer type products.
  • Naturally occurring product.
  • Persistently elastic - no embrittlement.
  • Can be installed in almost any weather condition.
  • No volatile organic compounds (VOCs).

General information

Color

Grey

Finish

Smooth

Material

Clay

Guidance for specification option:

Bentonite clay granules

Shape

Formless

Length

2 mm

3 mm

4 mm

5 mm

6 mm

Show more

Width

Bespoke

Height

2 mm

3 mm

4 mm

5 mm

6 mm

Show more

Uniclass

Pr_35_31_77_15 Concrete sealersPrimary

CAWS

D40/565 Proprietary waterstops

E40/320 Hydrophilic waterstops

Product range

Waterbars, Waterstops and Waterplugs

Specification data - Concrete sealers

Composition

A naturally occurring sodium bentonite in the form of varying sizes of granules.

Primer

No primer.

Category

Concrete joint and leak sealing.

Colour

Grey.

Specific gravity (in container)

0.8.

Specific gravity (in use)

2.6.

Installation temperature

5–40°C.

Sustainability data

Contains Red List materials

No

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Recyclability

0

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

Literature

Newton HydroBond 314 Bentonite Granules

Newton HydroBond 314 Bentonite Granules

Case studies

Waterproofing a Basement Office, London

Waterproofing a Basement Office, London

Similar products from Newton Waterproofing Systems

Fast setting Polymer compound for the sealing of leaks using Newton HydroCoat 313-WP - Polymer Compound to Seal Leaks

Fast setting Polymer compound for the sealing of leaks using Newton HydroCoat 313-WP - Polymer Compound to Seal Leaks