MuteBoard™ is a slim and practical acoustic board for wall soundproofing where space is limited, you can use it for the reduction of ambient noise levels when applied directly to brick, block or stud frames, or even raised noise issues that can range from intrusive conversation to televisions when installing on an isolated stud frame. MuteBoard™ is available in a variety of thicknesses: MuteBoard™ 2 – 19mm, MuteBoard™ 3 – 25mm and MuteBoard™ 4 – 27mm. These vary in acoustic performance and can be installed in a variety of ways, such as on decoupled stud frames, internal stud frames to split multiple rooms, or alternatively when you need to be conservative with space by directly installing them to your brick/block wall. Different installation methods will also vary the acoustic performance of the boards.
Slimline soloution to walls, tapered edges, plasterboard finish ready for skim, plaster layer, can be applied to both walls and ceilings, vibration dampening due to the tecsound SY 70
Can be applied direct to brick and block walls when space is sparse, tapered edges, plasterboard finish ready for skim, plaster layer, for reducing low level airborne noise and used internally on stud walls for best results, works well combined with tecsounds SY70
Can be applied direct to brick, block walls when space is sparse, tapered edges, plasterboard finish ready for skim, plaster layer, for reducing medium level airborne noise and used internally on stud walls for best results
15 mm acoustic plasterboard and 3.5 mm visco-elastic material
15 mm acoustic plasterboard, 6 mm closed cell PE foam and 4mm mass loaded vinyl
15 mm acoustic plasterboard, 2mm mass loaded vinyl, 6 mm closed cell PE foam and 4mm mass loaded vinyl
18.5 x 1200 x 1200 mm
24 x 1200 x 1200 mm
27 x 1200 x 1200 mm
|Uniclass 2015||Sound insulation gypsum plasterboards (Pr_25_71_52_80)|
© 2020 NBS Enterprises Ltd. All rights reserved.