NBS Source
List your products
Application

Designed to fit within very narrow stile sliding door stiles without compromising the high degree of security needed by these doors.

Description

Application:

Designed to fit within very narrow stile sliding door stiles without compromising the high degree of security needed by these doors.

Benefits:

  • Suitable for use on aluminium and timber doors.
  • Used with 4808 strike plate to prevent attempts to lift the door.
  • Range of turns and 8346 cylinder to provide flexibility of operation.
  • Self latching version will retract immediately on contact with strike to prevent damage.
  • Adjustability: A full 4.6 mm lengthening or shortening of bolt projection can be made by turning an exposed screw in the face of the lock. This can compensate for a considerable misalignment between door and jamb.
  • Anti-lifting: The three ply laminated stainless steel hookbolt is designed to withstand approximately ton of the force vertically or horizontally, thus protecting against jamb/door attack.

Additional information for this product is available from - http://www.adamsrite.co.uk/en/site/Adams-Rite-Europe/Products/Mechanical-locking/

General information

Uniclass 2015

Pr_30_36_08_24 Door latchesPrimary

CAWS

P21/24 Door locks

P21/515 Door locks

Specification data - Door latches

Product Reference

1848-11

MS®1848-11 Deadlock (Self latching).

1848-29

MS®1848-29 Deadlock.

5015

Deadlock for patio sliding door (for timber installations).

Accessories

None

1000-01-14-682

Aluminium turn for inside of patio sliding door.

1000-01-21-682

Aluminium turn for inside of patio sliding door.

1015-11-32-130 and 1016-130

Aluminium turn and back plate for use with 5015 Deadlock.

23-0064-23-130

4025 Block only for patio sliding door (requires 8346-01). Fixes direct to door.

23-0076-130

4024 Block only for patio sliding door (requires 8346-01). Fixes to pull handle.

4026-130

Block only for patio sliding door (requires 8346-01).

4808-01-603

Strike for patio sliding door, for use with 5015 deadlock.

8346-01

KD Cylinder (order with 4024 and 4025 blocks).

Standard product features

General:

  • Case: Zinc plated steel.
  • Forend: Square or full radiused ends (MS®1848), Radiused ends (5015).
  • Operation: Standard bored cylinder (with pull) or 1000 Series Turn.
  • MS®1848 latch version: Spring-loaded hookbolt for automatic latching. Other specifications as for deadlock.

Similar products from ASSA ABLOY Opening Solutions UK & Ireland