Monoprufe DPM

Application

  • Can be applied to substrates with 99% residual humidity.
  • Two coat application when topped with Ronacrete polymer modified screeds.
  • Three coat application with sand blinding may be required when application of screed or finish is interrupted for longer than 24 hours.

Description

Liquid applied membrane, suitable as a surface applied DPM to suppress residual moisture in screeds, prior to the installation of levelling compounds/ moisture sensitive floor finishes.

Features:

  • Bond strength to substrate: Greater than 1.5 N/mm².
  • Non-hazardous and solvent free.
  • Suitable as a DPM applied before laying thin bonded screeds or proprietary levelling compounds on drying concrete.
  • Water based polymer membrane system.

Application:

  • Can be applied to substrates with 99% residual humidity.
  • Two coat application when topped with Ronacrete polymer modified screeds.
  • Three coat application with sand blinding may be required when application of screed or finish is interrupted for longer than 24 hours.

General information

Features

Bond strength to substrate: Greater than 1.5 N/mm²

Non-hazardous and solvent free

Suitable as a DPM applied before laying thin bonded screeds or proprietary levelling compounds on drying concrete

Water based polymer membrane system

Uniclass 2015

Pr_35_31_68_16 Cold-applied bitumen solutionsPrimary

CAWS

J30/10 Cold applied damp proofing

J30/130 Cold applied damp proofing . . . . . .

Specification data - Cold-applied bitumen solutions

Product Reference

Monoprufe DPM

Similar products from Ronacrete Ltd

Monoprufe WP Elastic

Monoprufe WP Elastic

RonaFloor Epoxy DPM

RonaFloor Epoxy DPM

RonaScreed DPM

RonaScreed DPM