MFT-S2S-1L-Adhesive-Rivets-Screws
Application

System suitable for ventilated facade in new and refurbishment projects with the following cladding materials:

  • Fibre-cement.
  • High pressure laminate (HPL).
  • Metal.
  • Plaster.
  • Terracotta.
  • Ceramic.
  • Composite and stone.

Description

The Ventilated Facade one layer system consists of a specially designed bracket (MFT-S2S U/UI) and aluminium profiles (MFT-S2S TT and MFT-S2S RHS) for vertical substructure.

The brackets are specially designed to be fastened to the concrete slab or the steel beam and to withstand the ventilated facade loads (wind and self-loading). The brackets include different hole geometries in the base plate (for installing anchors or screws). When needed, the flexible point brackets are used in order to fix the vertical profiles, holding up the wind loads and allowing the thermal expansion of the profile. The brackets can be supplied with (pre-installed) or without isolators.

The vertical profiles are connected to the support brackets with specially designed screws for ventilated façade, S-AD, which avoids creating compressing forces from the profile against the wall brackets and keeps the profile connected by the support bracket in place.

Additionally, each profile will be connected to each other with the connector, MFT-S2S PC. The connector will be fixed to one of the profiles in order to allow the second profile to expand. Each bracket in combination with the profile will allow an adjustment in order to align the profile with the wall distance needed along the ventilated facade. With this system and depending on the profile, different tolerances can be achieved in order to minimize the wall irregularities and install the cladding material as designed.

Features and benefits:

  • mm adjustment capability of the profiles on the wall brackets.
  • Brackets are available from 80–300 mm or without isolators from 75–295 mm.
  • Only one support bracket per profile needed.
  • Profiles up to 4 m length fixed in only one support bracket.
  • Aluminium brackets and profiles according to EN 755-2; EN 573-3; EN 12020-2; EN 1090-3; EN AW 6063 T66 and EN1090.
  • The isolator separates the substructure from the base material reducing the thermal bridge (S2S UI).
  • Thermal bridge calculation in according with EN ISO 10211-1.

Applications:

System suitable for ventilated facade in new and refurbishment projects with the following cladding materials:

  • Fibre-cement.
  • High pressure laminate (HPL).
  • Metal.
  • Plaster.
  • Terracotta.
  • Ceramic.
  • Composite and stone.

General information

Uniclass 2015

Pr_20_85_07_04 Aluminium carrier railsPrimary

CAWS

G10/150 Steel framing system

G10/20 Steel framing system

H92/120 Rainscreen cladding

Specification data - Aluminium carrier rails

Product Reference

MFT-S2S-1L-Adhesive-Rivets-Screws

Brackets

-

Type

MFT-S2S U M / L

MFT-S2S UI M / L

Length

From 80–300 mm or without isolators from 75–295 mm.

Fastener

HIT-HY

HRD-H

HSA-R

HST-R

HUS-HR

S-MD

Profiles

-

Type

MFT-S2S RHS

MFT-S2S TT

Fastener

S-AD

Connector fastener

S-MD51LS

Accessories

None

Adapter plate MFT-S2S U AP L

Adapter plate MFT-S2S UI AP L

Connector MFT-S2S RHS PC

Connector MFT-S2S TT PC

Similar products from Hilti (Gt Britain) Ltd